MechDB Misadventures, Part 30: All-Pulse Laser Brawlgoyles

MechDB Misadventures, Part 30: All-Pulse Laser Brawlgoyles

Due to having an oversized 400-rated Clan XL engine in a standard frame encased in Clan Ferro-Fibrous armor (of which it can carry up to 13 tons), the Gargoyle/Man O' War OmniMech in MechWarrior Online is generally best used as a relatively fast brawler, with a large number of smaller, lighter weapons instead of a few larger, heavier ones. With the introduction of the GAR-M(TSP) variant, this philosophy can be taken a step closer to its logical conclusion by combining its left arm with the C variant's right arm and the E variant's side torsos to yield 16(!) energy hardpoints. One suggestion using all of these hardpoints is as follows:

Above: Mixing the Gargoyle M's left arm with the C variant's left arm and the E variant's side torsos gives the 'Mech at least 16 energy hardpoints - filling them with a 50/50 mix of Micro and Small Pulse Lasers, while using 8 additional Clan Double Heat Sinks to absorb their heat load and spare tonnage capacity, creates a tough, yet fast brawler that can eviscerate anything in a close-range combat scenario, especially against slower targets.

Prior to the introduction of the M variant of the Gargoyle, one of the closest pure energy-based pulse laser brawl configuration to the one shown above was as follows:

Above: Before the GAR-M(TSP) debuted, this was closest we could get to a pure pulse laser-based brawling setup for the Gargoyle, and compared to the one above, it has longer range but is more heat-intensive, wiht only 20 heat sinks instead of 24.

There are other pure pulse laser-based builds based on this chassis besides these two, but the Small/Micro Pulse Laser-based one could well be one of the most effective ones MWO will ever see - as long as you leverage its 12.5 tons of armor and 81.0km/h speed to absorb or evade incoming fire while keeping your cluster of tiny little lasers trained on whatever victim is unfortunate to get in your sights.