Showing posts with label Suggestions. Show all posts
Showing posts with label Suggestions. Show all posts

Friday, November 6, 2026

Confessions of an Automationeer, Part 275: The Fourth Crusade

Confessions of an Automationeer, Part 275: The Fourth Crusade

I was initially happy with my reimagining of the 1992 AAA Crusader (built on the '92 Evade with a 2.53m wheelbase) for the Al-Rilma update, until I realized that I could do even better on a different body set (specifically, the '87 Bossa Nova in front-engined configuration with a 2.4m wheelbase), so here it is:





Above, from top: If the AAA Crusader of the 1990s was based on the '87 Bossa Nova in front-engined configuration with a 2.4m wheelbase instead of the '92 Evade (2.53m wheelbase), this would've been the result. It's cheaper and simpler, but no less alluring. If anything, it may be an even more attractive proposition than the larger, heavier previous version.

Admittedly, the Bossa Nova is quite awkward to work with due to a lack of vertical engine bay space, and the limited number of morphing zones don't help, either. I did a better job than expected with it, though, and the result is a much leaner, meaner offering (320 horsepower and 325 foot-pounds of torque from a 5.0-liter all-alloy overhead-valve V8 with a 7000-rpm redline, hooked up to a 6-speed manual transmission, and all wrapped up in a galvanized steel body/chassis with alloy hood and doors for a lean 1285-kg kerb weight, distributed evenly across both axles) with a fully detailed interior (a personal first for this body set). The result is a 175-mph top speed and a 0-60 mph time of 4.7 seconds - very quick for 1992, and enough to trade blows with actual supercars of the era in the hands of a skilled driver, even on a challenging road or race track.

In addition to this, race-bred suspension (dual-wishbone front and a multilink rear) and brakes (13-inch 2-piston vented discs up front and 12-inch 1-piston vented discs at the rear, with ABS assistance for both axles), combined with 17-inch forged wheels wrapped in high-performance tires (225/45ZR17 front and rear), provide a blend of class-leading ride, handling, steering, and braking when combined with variable-ratio hydraulic power steering. And even with a premium interior and CD/cassette stereo sound system, along with dual front airbags and switchable traction control, it's still very affordable for its time, with a base price of $30,000 AMU in 1992 - which would've made it an incredible bargain.

In short, this build took a lot of work to get right on the outside (primarily due to its 1.7m width and 4.0-meter length that almost messed up the proportions of the exterior - until I chose the front-end design shown above), but was much easier to finish on the inside, especially engineering-wise, and shows that even a relatively awkward body set like the Bossa Nova can still yield decent results at the very least if you know what you're doing.

Update 1 (2:30 pm, UTC+7, November 7th, 2026): I tried shrinking the wheel diameter at both axles to 16 inches (instead of 17 inches), and made the front brake discs an inch (25.4mm) smaller in diameter, in addition to moving the weight distribution as far aft as possible (49% front/ 51% rear) with the leftover budget, creating a separate trim to accommodate these changes. The result looks like this:


Above: A 16-inch wheel fitment on the reimagined Crusader IV actually looks even better than a 17-inch one - in addition to increasing the tire profile from 45 to 50, it also saves 5kg when combined with the decrease in front brake rotor diameter from 13 inches to 12.

The result is a more lighter (by 5kg) and more comfortable car (in terms of ride quality) that still retains its ability to provide big thrills for a relatively low price -  a combination few can resist.

Tuesday, November 3, 2026

Confessions of an Automationeer, Part 273: Jekyll and Hyde

Confessions of an Automationeer, Part 273: Jekyll and Hyde


Creating a hardcore track-focused variant of the all-alloy Loryx Lynx (whose larger, all-steel alternate universe self turned out to be too heavy for the task, but not by as much as you'd think) might have seemed like a no-brainer, but given that the donor car was already quite light due to its all-aluminum construction, I had to make the engine lighter. To that end, it received individual throttle bodies and a high-flow exhaust with longer tubular headers, a high-flow catalytic converter, and a pair of straight-through mufflers, thus yielding 425 horsepower and 380 foot-pounds of torque - 50 and 30 more, respectively, than the base model. In addition, the redline was now 500 rpm higher, thanks to lighter forged internals. An increased compression ratio and cam profile also helped, but it still produced the bulk of its torque in the middle of the rev range, which kept it highly tractable even at lower speeds.

All this power would've been useless without some chassis tweaks to more easily harness it. This included lowered, stiffened suspension (without sacrificing too much comfort, even with a ride height 15mm lower), larger wheels and brakes (18 inches front and rear for the former, and a 1-inch increase in diameter for the latter, with more aggressive pads to boot), and a staggered tire fitment in place of the square fitment of the base model (245/40ZR18 up front and 285/35ZR18 at the rear, instead of 245/45ZR17 at both axles). Further weight savings were achieved with the use of a lightweight sports interior in place of the premium fittings of the donor car. Finally, downforce levels were increased and a few extra air intakes were placed up front for better cooling - a necessity for prolonged track driving or even fast road use.

The resulting car demands more respect from its driver compared to the standard version, but is even more rewarding when driven on (or closer to) the limit, especially on track. Its more uncompromising nature is reflected in a 0-60 mph time that's at least 0.2 seconds faster, with 5-6 mph of extra top speed. It also has even more grip and braking power (both of which are as useful on the road as they are at the track), but is less well-suited to being an everyday proposition as a result. It does, however, retain enough space for a roll cage if the owner wishes to fit one.





Above, from top: Trading some of the base model's creature comforts (and 80kg of its weight) for 50 extra horsepower and a more track-focused suspension, brakes, and wheel/tire fitment has made the '95 Loryx Lynx 5.0 GTS (solid blue) even more focused than the GT - but it's still a looker from every angle.

In short, it may not be for everyone, but those who prefer something more focused would be better served by the sharper GTS than the regular GT, which was no slouch itself. However, the GTS has an easier time leveraging its performance-oriented aesthetics, marketing and focus to deliver a take-no-prisoners driving experience for anyone who can handle its more race-bred performance and feel.

Friday, October 30, 2026

Confessions of an Automationeer, Part 271: A More Realistic Lynx

Confessions of an Automationeer, Part 271: A More Realistic Lynx

After testing multiple proposals for the Loryx Lynx, I came to the conclusion that the stubby, short-tailed, and aluminum-bodied original design, as innovative and light as it was, wouldn't quite be as realistic of a production proposition in the real world as I thought it would. So, I cloned the long-tailed, long-nosed version of it, gave it all-steel construction (high-strength steel for the chassis with treated outer panels), and downgraded to the premium interior/sound system and square-fitment 245mm-wide tires (with 17-inch forged wheels) found in the original, to get the best of both worlds. In addition, I reverted to the 375-horsepower version of the Lynx's V8 and tweaked the mechanicals accordingly. Finally, I dialed back the quality usage slightly to cut the price to a more affordable $40,000 AMU instead of the $50k or even $60k that some proposals had. The resulting car not only had a shorter engineering time (at 110 compared to the 120 or more found in the other proposals), but had lower service and production unit costs.









Above, from top: In scaling back the price of the Loryx Lynx to $40,000 AMU, I had to make some compromises, but not too many of them - and they weren't as detrimental as I'd feared. The long-tailed, long-nosed, Coke-bottle notchback proposal actually looks even better than the shorter fastback original - especially with widened fenders to allow for a wider track.

This larger (4.61m long by 1.87m wide) and heavier (1500kg) body, despite (or due to) its longer overhangs, would've been even more suitable for production - and functional, too, considering that a longer body is more aerodynamically efficient than a shorter one, assuming everything else stays the same. It's also more practical, since the long-tailed version has a larger, more capacious trunk. Finally, its revised proportions (especially in side profile) remind me of the now-obsolete Morton Kestrel that I made as my first car in any UE4 Automation game build (4.17, if you're wondering - we're on 4.27 now, and nothing from earlier UE4 releases can be carried over into that one), or rather, a predecessor to it.





Above, from top: It was inevitable that the premium interior of the original Lynx had to be retained virtually as-is on this cheaper, more realistic build, rear luggage parcel shelf and all.

In short, while not quite as capable or prestigious as any of my earlier proposals for the Loryx Lynx, this more affordable version almost matches them for pure performance, and is a far more realistic and affordable production proposition - while still retaining the elegance and comfort the Lynx is known for. However, the short-tailed version is too good for me to let go of, and I could use its proportions for a limited-run coachbuilt special based on the Lynx, if I indeed feel like making such a thing.

Thursday, October 29, 2026

Confessions of an Automationeer, Part 270: A Matter of Proportions

Confessions of an Automationeer, Part 270: A Matter of Proportions

With the Loryx Lynx's design and engineering finalized, I decided to compare it with my only other fully detailed 3D roof fixture build, the Trieste GT from an aesthetic standpoint - specifically, their proportions.




Above, from top: A side-by-side comparison of the Loryx Lynx and Trieste GT from three angles (side, front, and rear, respectively).

Glancing at both designs from the side, their short-tailed, long-nosed profiles (which resemble fastback coupes from the side, although they are still notchback coupes in-game, rather than liftbacks) are exactly what big, powerful front-engined, rear-drive sports cars and grand tourers need. However, the Lynx is 8cm shorter than the Trieste (4.45m vs. 4.53m), mainly due to the former having its front and rear overhang morphing zones at their shortest settings (as far inward as possible), with both the upper and lower front bumper morphing zones at 50% of their respective maximum lengths. The Trieste GT, on the other hand, has a wheelbase that is 16cm longer, and front and rear overhangs at their longest settings (as far outward as possible), but is considerably wider (around 10-12cm), due to its body width morphing zone being given the widest possible setting.

A closer inspection at their underlying body sets reveals that while the '96 Kompact (which underpins the Trieste GT) has a wider track (thus allowing for the fitment of wider tires at both axles) and shorter overhangs (yielding less weight and more drivability), the '92 Evade (on which the Loryx Lynx is based) has a wider engine bay. This gives the Kompact a squarer footprint compared to a similarly sized Evade. Also, the latter has fewer body types than the former, but I've been perfectly content with those, whereas the plethora of body styles on the Kompact can be confusing at first. Finally, the Evade, unlike the Kompact, has additional variants besides 2-door sports cars in various sizes; it has sedan, wagon, and even minivan variants in a multitude of wheelbases (none of which are shared with the sports car variants).

To conclude this post, here's what the original Lynx looks like compared to a long-tailed, wide-bodied version of itself:





Above, from top: A long-tailed Loryx Lynx wouldn't just have been longer, but also wider (if its front and rear fender morphing zones were at their widest settings), and would've lost its pert, fastback profile in favor of a longer-nosed notchback one that, in some ways, would've been even more graceful and aerodynamically efficient - but at the expense of being heavier, with a larger footprint and higher polar moment of inertia, although it would've also allowed for more storage space at the rear.

In short, with or without lengthened overhangs and/or widened fenders, the Lynx represents a refinement of my skills in combining fully detailed interiors with 3D roof fixtures - it took me dozens of attempts to get right, but it was even more rewarding than with the Trieste GT that represented my first foray into this Automation design technique. In fact, the short- and long-tailed proposals for it have left me with a dilemma as to which one(s) I should canonize - one possibility is to make the long-tailed version the base model and have the short-tailed one form the basis of a coachbuilt special, or vice versa. Either option would be preferable to keeping only one design while rejecting the other.

Monday, September 28, 2026

Confessions of an Automationeer, Part 264: Inset Roof and Pillar Linings under 3D Fixture Roofs

Confessions of an Automationeer, Part 264: Inset Roof and Pillar Linings under 3D Fixture Roofs

I've been experimenting with the idea of placing inset 3D fixture roof and pillar linings under a separate 3D fixture roof, and after some trial and error, I managed to get the right size, shape, and placement for the upper interior fixtures on this build based on the '96 Kompact, (2.69m wheelbase) as follows:








Above, from top: An inset placement for these 3D fixture upper interior components (pillars and roof), combined with surface alignment and 2D conforming, helps them stay hidden under the 3D roof fixture I fitted to this build as a replacement for the stock roof.

Remember when I discussed using a 3D roof fixture on this body set in an earlier post? For those who somehow forgot about that, I'll explain: The stock turret is somewhat awkward compared to the rest of the car's shape - so why wouldn't I want to replace it? Of course, with the new roof in place, I still had to make the upper set of interior fixtures align nicely with its shape, so I had to push them inward by just the right amount to prevent them from clipping through the roof and/or pillars.

As for the rest of this build, it's still a work in progress - I should shrink or hide the transmission tunnel to prevent it from clipping through whatever floor fixtures I choose to place, and build the interior around the bodywork accordingly - but with all of the upper interior fixtures in place and appropriately sized, it's off to a decent start.

Thursday, September 3, 2026

Infinite Space Insights: Rebalancing a Hypothetical Sequel

Infinite Space Insights: Rebalancing a Hypothetical Sequel

As good as Infinite Space III: Sea of Stars is, I would not be surprised if its sequel turned out to be even better still. However, for this to happen, some of Sea of Stars' balance issues need to be addressed as follows:
  • Currently, Gorgar's Garthan capital ship (one of the possible allies the player can encounter) may spawn even if the Garthans' home world (whose host star system is always a white F-type star, which is hotter than a yellow G-type star, but cooler than a bluish-white A-type star) and correspondingly higher Garthan fleet strength is not present on a randomly generated sector map. Preventing the Garthan capital ship from spawning  under such circumstances would thus make such a scenario more challenging by reducing the potential maximum attainable score, but on the other hand, would reduce "wastage" of fleet slots (of which there are six - four for capital ships and two for fighters). 
  • Related to this, In Sea of Stars, it is possible to have a maximum fleet size of five vessels (three capital ships and two fighters) if the map contains Zorg and Muktian home worlds, but recruitable allies that fly Zorg and Muktian capital ships are absent in addition to the Damocles and Kestrel (both of which are quest-specific). while both the Zorg and Muktian fighters can be recruited from the map by visiting the systems where they are found (and in the former case, after transferring an item from your inventory to the mercenary owning said Zorg fighter). Preventing a Garthan capital ship from spawning as a recruitable ally under such circumstances would thus remove the possibility of potentially having too much dead weight on the player's roster.
  • If any one of the Zorg, Muktian, and Calatian home worlds are present on a randomly generated map, the probability of negotiating an alliance with them should initially be 100%, by giving their respective allies a 100% chance of spawning on the map at the start of a game. To balance this out, such behavior should be incentivized by increasing the credit bonus earned through diplomacy.
  • The probability of quest-triggering items, fleets, and discoveries spawning at the start of a game should be decreased from 100% to 20% or 25%, to reduce the probability of completing the corresponding quest and gaining its associated score bonus.
  • If Esmerelda (who will steal a random item other than the Klakar Beacon from your cargo hold and deliver the former to the homeworld of a randomly selected faction, including your own, or your ship's towels if you have no such items) is present anywhere on the map at the start of a game, either or both of the only two items capable of capturing her (the Toy Robot and Lookout Frogs) must also be guaranteed to spawn alongside her, albeit in a different system from where she can be encountered in both cases. This makes it more likely for the player to earn her associated 500-credit bonus; to make this task even easier, both the Toy Robot and Lookout Frogs could grant the ability to detect Esmerelda's location on the map by marking it with a dashed blue circle (assuming the player has never previously encountered her), to allow the player to actively seek her out upon storing either item in their cargo hold. Neither item should be 100% guaranteed to spawn at the start of a game if Esmerelda is absent from the map, though, nor should they be able to detect other potential passengers (Phredd and Smetlov's Brain) - both of these rules are retained from Sea of Stars.
Hopefully, if Digital Eel (which has been the franchise's developer since the original game) were to ever consider developing an Infinite Space IV, they could (should?) at least examine the possibility of implementing at least some of these balance adjustments into the next installment.

Confessions of an Automationeer, Part 262: Copycat Roof Swaps

Confessions of an Automationeer, Part 262: Copycat Roof Swaps

I've recently spent some time investigating some additional possibilities for roof transplants on the '88 Copy Cat, and eventually I was able to come up with the following options as some of the best ones from an aesthetic standpoint:








Above, from top: A comparison of several 3D fixture roof fixtures transplanted onto the '88 Copy Cat (shown here in notchback configuration with a 2.64m wheelbase), shown in side profile.

Aside from the fact that the JAG_220 variant of the SHD 90s Euro Sports fixture set on the notchback is potentially better at making an XJ220 replica than using the supposedly more faithful fastback variant, my testing yielded a few surprises:
  • The FER_F50 and FER_F50_GT roof fixtures can work surprisingly well, especially if you make the front and rear fascias (which takes you closer to an F50 replica, if you want to make one).
  • The ASC_KZ1 variant of the SHD US 00s Sports fixture set gives even more cab-forward proportions than the JAG_220 fixture variant mentioned above.
  • The DOD_VIP_ZBII variant (also from the SHD US 00s Sports fixture set) also provides a more dynamic cab-forward look, as does the AR_8C variant of the SHD Euro 00s Sports fixture - but the former has a more pronounced double-bubble roof.
  • The CHE_C5R variant of the SHD US 00s Race fixture set may appear more static on paper than some other options, but in reality, it can be a great choice if you want a more minimalistic look.
I've also tried other 3D roof fixtures on this body set, but these are some of my favorite choices when working with it using a custom roof in place of the stock turret. The only caveat, aside from having to resize and reposition the fixtures accordingly to match the window line is that some of them can make the interior somewhat claustrophobic (if one is fitted at all) due to their small rear windows, but otherwise, they all work well enough.

A Lifer's Diary, Part 18: Applying Hotshot Racing Customization Logic to Game of Life Movers

A Lifer's Diary, Part 18: Applying Hotshot Racing Customization Logic to Game of Life Movers

Having played Hotshot Racing for countless hours so far, I decided to extrapolate one of its best aspects - its customization system - to The Game of Life (or specifically, its various video game adaptations) and applying it to its movers (which represent players' locations on the board) to give players more options to express their personalities and individualities further than they otherwise would. So here's a breakdown of what would be in store if such a feature were to be implemented.




Above, from top: Every car in Hotshot Racing can have up to 16 customization slots (not counting palettes, which simply change the foreground, background, and accent colors of the currently applied skin) - having such a wide range of options for these categories would make any video game adaptation of The Game of Life even more attractive to prospective players.

I would suggest carrying over the customization from Hotshot Racing wholesale into a Game of Life adaptation (in video game format) - the only things I would change are replacing the Steering Wheel and Dashboard slots with Interior Color and Interior Pattern slots (if the movers were to also have fully detailed interiors), along with allowing players to specify custom colors for their chosen exterior color palette should none of the presets be to their liking, and adding the option to save specific setups to their profiles for later use if they feel like using it again.

Obviously, for anyone playing a Game of Life video game to even be able to use these items in the first place, they could (and in my opinion, should) be forced to unlock them by buying them with points accumulated from completed games and/or completing specific tasks, as is the case in Hotshot Racing. This would incentivize completionism even further, and would help mitigate the problem of new players getting too carried away with their chosen mover's aesthetics. Players' avatars should also be given customization options as well (something that hasn't happened since Generation III was included in Family Game Night 3), with similar criteria for acquisition. With these features, you could make any future video game adaptation of the Hasbro Game of Life much more compelling by adding some much-needed replay value. For good measure, it could be possible to extend this feature to every version that is simulated in a future video game release, which will definitely come in handy in a compilation featuring at least one previous iteration of The Game of Life alongside the one currently in print.

In short, bringing back more options for avatar customization to any video game adaptation(s) of the Game of Life, in addition to expanding the list of mover customization options, would significantly broaden its appeal, not just to younger players, but also to older ones as well.

Wednesday, September 2, 2026

Hotshot Tales, Part 21: Shadows of the Patriots

Hotshot Tales, Part 21: Shadows of the Patriots

In my previous post overall, I showed how the '86 Rosso could be given a two- or three-tone livery even after its stock roof was replaced, as follows:





Above, from top: A three-tone livery is possible on the '86 Rosso by choosing a different exterior color for the lower side bodywork (which in the case of this body set, is the Secondary Car slot) and bumpers in addition to specifying a third color for the front lip, and rear valance/side skirts (represented by the Misc. Paint 3 and Misc. Trim 1 areas, respectively) as an accent. If you wish to use a two-tone livery instead, you could use a single color for both the main and lower bodywork (including bumpers) while also applying a different color to the Misc. Paint 3 and Misc. Trim 1 areas; alternatively, extending that color to the lower bodywork places it in a foreground role instead of as an accent.

What intrigued me most about these exterior color areas, however, is that it's also possible to duplicate some of the liveries in Hotshot Racing using Aston's Drift car, the Shadow, and applying Skin 3 (which finishes the middle and/or lower bodywork in contrasting colors when choosing most palettes outside of the Special Set, whose palettes always apply a single color to the entire car), as follows:












Above, from top: Using Skin 3 on Aston's Shadow in Hotshot Racing, it's possible to get a 3-tone livery similar to what I applied to my test build in Automation - with some palettes displaying variations on the theme by changing the order of the colors and/or making some of them brighter or darker. Admittedly, the middle part of the front bumper is color-matched to the car's background color and not the middle horizontal band, but you get the idea. In any case, Alexa's 9th palette (which is one of the defaults for her Speed car, the Mirage) is the closest match, though, When combined with the Shadow's default wheel type (a red 5-spoke design - the Automation build has white ones, although they can be recolored accordingly if desired, unlike the wheels in Hotshot Racing), the similarity becomes even more pronounced.

This is, however, just one example of how Automation allows you to pay tribute to a car/livery combination in Hotshot Racing - but there are many others, and those, too, can be replicated (or at least approximated) using skillful use of body molding, decal, and exterior area color choice manipulation.

On the subject of customization, that topic, in turn, will be the topic for another post in yet another series of mine.