Tuesday, August 15, 2023

Confessions of an Automationeer, Part 159: A Birthday Gift

Confessions of an Automationeer, Part 159: A Birthday Gift



In anticipation of my 31st birthday, I revisited Automation and decided to start work on a build that would serve as a spiritual successor to the Imperia I had made in an earlier, obsolete version of the game. After a few hours of work, I came up with this: the LVC LS60. This was a pure vanity project, given that it wasn't intended to be a challenge entry (and may never even become one), but I remain proud of it nonetheless.


Above and below: The LVC LS60 is distinguished by its simple yet beautiful design, achieved by careful adjustment of morphing zones and well-planned fixture placement, including the body molding at the rear, which has been shaped to resemble a spoiler.


As I was designing its exterior, I deliberately styled the LS60 to resemble various sports prototypes of the 1960s, hence the elliptical grille, front vents, and headlight lenses. In addition, I placed a body molding fixture at the upper edge of the rear bodywork to resemble a ducktail spoiler (especially since it relies on lip/diffuser fixtures and an aerodynamic undertray to generate downforce), and used cutout patch fixtures to extend the rear glass so that it resembled a wraparound rear window. Finally, the air intakes are placed on the rear fenders, behind the doors, for a cleaner side profile.


The interior of the LS60 is very luxurious, and is finished to the highest standards using genuine high-quality wood, leather, and metal trim.

The interior is no less impressive - I put a lot of effort into it, and it showed. In particular, I used a circular air vent fixture to make the chrome rings on the dials, with the leftmost ring housing the fuel, oil, and temperature gauges. A CD player with a high-quality stereo sound system comes as standard, although the steering lacks power assistance to save weight and improve road feel.

All of this exquisite design would be for naught, however, without thoughtful engineering, and so I gave the LS60 a carbon-fiber composite body and chassis with pushrod-actuated suspension front and rear. Underneath its wraparound rear window sits a 6.0-liter all-alloy naturally aspirated V12 developing 660 horsepower and 475 foot-pounds of torque, sent to the rear wheels via a six-speed manual gearbox and a mechanical limited-slip differential. Moreover, the brakes are large vented discs (375mm front, 345mm rear) gripped by 6-piston calipers up front and 4-piston calipers at the rear. The front and rear tires (high-performance, as usual), wrapped around 18-inch forged alloy wheels, have widths of 245m and 325mm, respectively. Finally, the suspension is tuned for performance on both road and track, with progressive springs, mono-tube dampers, and passive sway bars.


Six examples of the LVC LS60, each finished in a different exterior and interior color combination.

The LVC LS60 is capable of over 225 mph and can reach 60 mph in just 3.3 seconds from a standing start, but to avoid excess oversteer, I had to shift the weight as far forward as the game would allow.  This, however, is virtually mandatory for all mid-engined builds due to quirks in how weight distribution is calculated. And even with the default tech pool settings (+5 on all engine and trim areas), it still costs $79,000 AMU in-game - in real life it would carry a high six-figure or even seven-figure price tag. Even so, I felt that developing the LS60 was well worth the time and effort.

That concludes my summary of one of my recent Automation builds - and don't forget to wish me a happy birthday as well! Here's to many more years of Automationeering, with loads of thrills and spills along the way.

Thursday, July 20, 2023

Confessions of an Automationeer, Part 158: Another CEL Challenge Remix Update

Confessions of an Automationeer, Part 158: Another CEL Challenge Remix Update


The CEL Challenge Remix spinner wheel set after my latest revisions.

I have revised the CEL Challenge Remix spinner wheel set (shown above) yet again, so here are some of the changes I made:
  • The "Cast Headers Only" Unlucky option is now "Compact Intake and Headers Only", which is even more restrictive, thus making builds under this condition more challenging with regards to engine output (although combining the two will reduce loudness values even further than if either of them were selected on their own). Moreover, the "FWD" option now requires longitudinal engine placement, which is even less space-efficient, but is available sooner. Finally, the "1x Single Barrel Eco Carb Only" is no longer compatible with racing or performance intakes, limiting engine outputs even further if it applies.
  • The "Unlimited Fuel Octane" Lucky option now allows use of any fuel type, regardless of its octane rating and category (leaded, unleaded, ethanol, etc.). In addition, the "AWD" option no longer allows the use of a 4x4 drivetrain, since the two drivetrain types are not one and the same. Another restriction that for a combination whose Era is either the 1940s or the 1950s, selecting AWD results in an invalid combination that cannot be used, since the earliest year in which AWD can be unlocked is 1965, and even then, only with +15 techpool and a longitudinally mounted engine.
The other four wheels in the set remain functionally unchanged compared to previous versions. Overall, this is a light refresh meant to make the spinner wheel set less confusing and more specific in certain situations.

Thursday, June 22, 2023

The Infinite Space III Random Ship Generator Spinner Wheel Set

 The Infinite Space III Random Ship Generator Spinner Wheel Set

I finally went ahead with creating a spinner wheel set for generating random capital ship builds in Infinite Space III: Sea of Stars' Combat Simulator, so here it is:


The Infinite Space III: Sea of Stars spinner wheel set for generating random capital ship builds for the Combat Simulator mode.

The wheels, from left to right, top to bottom, are as follows:
  • Faction: The species to which the ship belongs.
  • Size: The overall size of the ship. Scouts are small, corvettes are medium-sized, frigates (except for the Garthan and Klakar Frigates, which are both huge vessels) are large, and destroyers (as well as all larger or similarly sized ships) are huge. Note that this wheel's result can be ignored if the result for Faction is Klakar or Kawangi.
  • Drive: The type of interstellar drive fitted to the ship, used while traveling between systems (not during combat).
  • Thruster: The type of sublight thruster fitted to the ship, mainly used during combat.
  • Shield: The type of shield generator fitted to the ship.
  • Wild Card Type: A random effect that imposes certain conditions for the build.
  • Special Equipment: Determines what equipment other than shield generators is fitted to the ship. Can be spun up to three to five times depending on how many equipment slots the ship has after fitment of a shield.
  • Wild Card: Determines whether or not the Wild Card options are in effect.
I have decided not to implement a wheel for weapon range, given that the sheer number of weapons in Sea of Stars means that there should be a separate set for weapon types - but I plan on making one if I feel like it.

A Random Ship Build Generator for Infinite Space III: Implementation Using Spinner Wheels

A Random Ship Build Generator for Infinite Space III: Implementation Using Spinner Wheels

After creating and using several custom spinner wheel sets, I recently hit upon the idea of making one to serve as a random capital ship generator for use in the Combat Simulator mode of Infinite Space III: Sea of Stars. This one would need several spinner wheels: one for the faction to which the ship belongs, another to determine its size, and several for equipment choices. There would be four options for size (small, medium, large, and huge), and twelve options for factions (Terran, Zorg, Calatian, Muktian, Garthan, Urluquai, Tan Ru, Pirate, Klakar, Kawangi, Ravian, and Tchorak - if the last three of these options are spun, ignore any and all results from all equipment-related spinner wheels, and if Kawangi or Klakar are spun, ignore the effect of the Size wheel, since these factions are limited to one size of capital ship each).

On the subject of equipment, there should also be individual wheels for thruster, interstellar drive, shield, and special equipment options (a term referring to targeting computers, scanners, ECM systems, repair modules, cloaking devices, and navigation aids), the last of which can be spun up to three times for each random ship build, depending on the ship type. In addition to these, there should be two more spinner wheels: one for the range bracket in which the ship's weapons are most effective (short, medium or long), and one for various wild card effects, which would be as follows:
  • Change Faction: Respin the Faction wheel.
  • Change Size: Respin the Size wheel.
  • Change Thruster: Respin the Thruster wheel.
  • Change Shield: Respin the Shield Wheel.
  • No Special Equipment: Do not fit anything other than a shield generator to the ship.
  • All Slots Filled: Fill each and every equipment slot not occupied by a shield generator with anything you want.
And to determine whether or not the chosen wild card option is in effect, the last spinner wheel would have two options: Yes or No. If this wheel lands on No, none of the wild card options will take effect; otherwise, the selected wild card option must apply.

This concludes my rundown of the proposed Sea of Stars capital ship generator spinner wheel set.

Wednesday, June 21, 2023

Confessions of an Automationeer, Part 157: CEL Challenge Remix Expansion Ideas

Confessions of an Automationeer, Part 157: CEL Challenge Remix Expansion Ideas

Currently, my CEL Challenge Remix spinner wheel set (link here) consists of six wheels, similar to those in the original CEL Challenge, but with a different number of options for most of them. However, I am now considering expanding the CEL Challenge Remix even further by adding two additional spinner wheels to the existing six, for a total of eight. One of these will determine its exterior color; the other will determine the exact trim/variant year (for any Era option other than Oil Crisis).

The first of these new spinners, called Exterior Color, determines the exterior color that must be used for a randomly generated build, irrespective of its shine, flake, or pearlescent effect. Its options would be as follows:
  • Red
  • Orange/Brown
  • Yellow/Gold
  • Green
  • Blue
  • Purple/Pink
  • White
  • Silver/Gray
  • Black
  • Any (free choice of exterior color)
  • Respin (spin again)
The second spinner, titled Trim Year, would be used for selecting the required trim year for the build, referring to the final digit of its trim year. There would be 12 options for the final digit, as shown below:

  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • Any (free choice of trim year)
  • Respin (spin again)
To tie in to this, the Lucky spinner wheel could gain four additional options: Change Color (respin the Exterior Color wheel), Change Year (respin the Trim Year wheel), Choose Any Color (replaces current Exterior Color by setting it to "Any"), and Choose Any Year (replaces current Trim Year by setting it to "Any"). With these changes in place, the number of possible specific combinations will increase even further. However, implementing them will also make the set more complicated than it already is. So although these revisions are still on the table, I will hold off on introducing them for now.

Thursday, June 15, 2023

A Lifer's Diary, Part 6: Examples of Playstyles

 A Lifer's Diary, Part 6: Examples of Playstyles


Having played the Game of Life for well over two decades, I have realized that players tend to fall into one or more different playstyles, which are reflected in the way they approach the game. With this in mind, I have coined terms for some of the more prominent playstyles, four of which are described below.
  • Money Grubber: This is characterized by using a high-paying salary (or, from Generation III onwards, a career which has such a salary) to maximize the amount of cash that can be earned by passing or landing on Pay Day spaces, while also aiming to collect as much additional money from Collect Spaces (or, from Generations IV and V, Action Cards that reward money instead of taking it away) along the way. However, it is less effective when used with less lucrative salaries.
  • Family Man/Woman: Players with this strategy prefer to have as many children as they can over the course of the game. This yields more children's gifts at the end of the game, allows them to earn more Life Tiles, or both, depending on the version of the game being played. However, in some versions, it runs the risk of having to pay more money if you land on certain spaces.
  • Lucky Investor: Using this playstyle requires a lot of foresight, since it requires buying a Stock/Long-Term Investment early on, and ensuring that its number is spun often enough throughout the game to make its purchase worthwhile. This can also happen in Generation V if a player chooses the right number when landing on an Invest space for the first time, and also in Generation IV with its Careers' built-in Lucky Numbers.
  • Slow Burner: A less salary-dependent strategy than the Money Grubber, relying heavily on accumulating large numbers of Life Tiles/Action Cards in general and maximizing resale value for any Houses owned to make up for any shortages of cash on hand at the time of retirement. At the end of the game, the cash value of these items will be added to the player's net worth, potentially taking them ahead of at least one opponent in the process.
The ideal strategy should combine elements of all (or at least most) of those playstyles, although it is possible, though more difficult, to win with a strategy that uses no more than one of them. But no matter what strategy and playstyle you choose when playing the Game of Life, be sure to have fun!

Monday, June 12, 2023

Confessions of an Automationeer, Part 156: A Simple Solution

Confessions of an Automationeer, Part 156: A Simple Solution

Recently, I challenged myself to make a car whose exterior design had a grand total of 25 fixtures in total, as a submission for a forum challenge limiting entries to 100 fixtures or fewer. This time, I used my CSR121 entry (the '94 GEC GS2 Turbo, an old build from an earlier version of Automation that has since been rendered obsolete by various game updates) as inspiration, but decided to reimagine it with a far simpler design (on a new, hugely improved version of the original car's body set) to comply with my chosen fixture limit. The resulting car, the 1992 GEC G2S Turbo 2.0, is shown below.



The GEC G2S Turbo 2.0 is a more minimalist reimagining of my CSR121 entry, built on similar principles.

The G2S Turbo is powered by a 200-horsepower turbocharged straight-four driving the rear wheels via a five-speed manual gearbox and a limited-slip differential, but we're here to discuss how I managed to squeeze just 25 fixtures into the design (which was actually quite coherent, by my own admission), not to explain its technical specs and performance stats. I used 9 fixtures at the front (2 wipers, 1 grille, 1 mirrored indicator repurposed as a fog light, and a headlight cluster comprised of 5 mirrored headlight fixtures), 4 fixtures on the sides (1 fuel filler cap, 1 radio antenna, 1 mirrored door handle, 1 mirrored side mirror) and 12 fixtures at the rear (5 mirrored headlight fixtures for the taillight clusters, 1 centrally mounted headlight fixture for a rear reflector, 1 taillight fixture for a central third brake light, 1 rear-mounted license plate, 1 exhaust pipe, and 3 body moldings - one shaped and placed like a small rear spoiler, another as an exhaust pipe cutout, and the last one serving as a license plate holder), for a total of 25 fixtures in all.

Overall, I liked how well this one turned out - even more so than my first submission for this challenge, with was entered in the 10-fixture category, and in hindsight felt very crude by comparison. The next most difficult category (which required a maximum of 25 fixtures - there are also categories for cars with up to 50, 75, and 100 fixtures, respectively) felt more suited to my skillset, so I chose that one for my second submission. After looking at the G2S a second time, I reckon that its exterior design could easily be developed further into a more highly detailed build with more fixtures, possibly even incorporating a fully 3D interior (which the base model does not have). For example, adding front and rear badges, as well as a front license plate, and some additional body moldings on the sides and front (if I choose not to install any functional aerodynamic fixtures) would only require five more fixtures in total, bringing the fixture count up to 30. Even so, I am happy with this build, especially given the fact that the original GEC GS2 required 29 fixtures - four more than the G2S shown here.