Tuesday, November 8, 2022

Confessions of an Automationeer, Part 124: Indicators of Success

Confessions of an Automationeer, Part 124: Indicators of Success

One of the recently added body sets in Automation has quickly become a favorite of mine. Called the Indicator, it is available from 1988 onwards, and comes in four sizes: small, medium, large and extra-large, with wheelbases of 2.55, 2.70, 2.85, and 3.00 meters respectively. Each of them comes in 14(!) different body styles (2- and 4-door soft-top convertibles, 2-door and 4-door sedans, 2-door and 4-door coupes, SUV, minivan/MPV, pickup truck/ute, 3-door and 5-door hatchbacks, 5-door wagons/estates, plus 3-door and 5-door liftbacks for the two smallest sizes), opening up a very wide range of possibilities from the late '80s through to the whole of the '90s and even the early 2000s.


The new Indicator body sets are among the most diverse and useful in Automation as of LCV4.2.32.

These body sets were introduced as a replacement for a similar-looking body set (available from 1990 onwards) that debuted as a Steam Workshop mod. Over time, it became popular enough to be added to the list of vanilla (default) body sets. Originally, it came in one wheelbase (~2.7m) and three body styles (4-door sedan, as well as a 2-door coupe or convertible, the latter with a soft top just like its successor). However, this was a very limited choice compared to some other similarly sized contemporary body sets, and over time, this and its other limitations (such as a lack of morphing zones in certain areas) became apparent.

It should therefore come as no surprise that I find its replacement to be vastly superior in nearly all aspects. Along with their sheer diversity of body styles and morphing zones across all sizes, the Indicator body sets can now accommodate wider tires and wheels on both axles than their predecessors (or equivalents, for sizes other than the default 2.7m wheelbase). In fact, one of my few complaints about them is that each one has a narrower engine bay than they should have. Also, their body roll is generally higher than it should be for comfort-oriented builds. Nevertheless, I expect them to be highly popular - potentially even more so than other similar contemporary body sets - and would happily use any of the bodies in this set to flesh out a company's lore.

The Indicator body set is not the only one in Automation that has proven to be a worthwhile replacement for its predecessor. For example, the rounded 1985 coupe body set, introduced back in the Kee era with two wheelbases (2.52m and 2.72m) has since been remade with a smoother appearance, revised morphing zones, and a greater number of body styles, plus two additional wheelbases (2.42m and 2.62m) and a more appropriate unlock year of 1988. The 1995 Egg body set (another holdover from the Kee era) has also been reworked, and now comes in multiple wheelbases (from 1.9m to 2.6m), with all but the smallest of these being available as 3- or 5-door hatchbacks (the 1.9m wheelbase variant only comes with three doors - no more, no less). Finally, in place of a pair of much-used but slightly bugged mid-engined body sets with an unlock year of 2000, there are four new similar-looking body sets (called Mako) with an unlock year of 2009 - and modders have even created versions of them with larger engine compartments, among other changes.





Do any of these Automation body sets look familiar to you? If so, that's because they're superior remakes of existing body sets that were introduced in previous game builds.

In short, the Automation community's program of remaking car body sets that date back to long-obsolete builds is mostly a win-win - we might have to remake any cars built on those bodies, but the results will look and feel far better than they used to.

Thursday, November 3, 2022

Confessions of an Automationeer, Part 123: CEL Paint Color Generator

Confessions of an Automationeer, Part 123: CEL Paint Color Generator

As an addendum to the spinner wheels used for the CEL Challenge and its associated random engine generator, both of which I have discussed previously in this series, I have chosen to create another set of spinner wheels. This one, however, is different from those two in that instead of a car, or an engine, it can be used to generate a paint color that can be applied to any car in Automation, specifically, for all (or most) of its exterior panels. Here it is:


Above: An overview of the CEL Paint Color Generator.

The functions of the wheels above are as follows:
  • Base Hue: The basic color of the paint material. If this lands on Black, Gray/Silver or White, ignore the effect of the next two spinners.
  • Base Saturation: The amount of saturation the base color has.
  • Base Value: The amount of brightness the base color has.
  • Flake/Shine: The amount of flake and gloss the paint material has. This must be spun twice: first for shine, then again for flake (although the order can be reversed if desired).
  • Pearl Strength: This determines the strength of the paint color's pearl effect - if it lands on None, the results of the next three spinners can be ignored.
  • Pearl Hue: The color the pearl effect will impart. If this lands on Black, Gray/Silver or White, ignore the effect of the next two spinners.
  • Pearl Saturation: The amount of saturation for the color provided by the pearl effect.
  • Pearl Value: The amount of saturation for the color provided by the pearl effect.
For all spinners other than Base Hue and Pearl Hue, the values (as shown in the materials tab) that the options refer to are as follows:
  • None (Flake/Shine and Pearl Strength only): 0.00
  • Very Low: 0.01 to 0.19
  • Low: 0.2 to 0.39
  • Medium: 0.4 to 0.59
  • High: 0.6 to 0.79
  • Very High: At least 0.8
  • Full: 1.0
Here is an example of a randomly generated set of paint color attributes using the above set of spinner wheels:


An example of a randomly generated set of paint color attributes using the CEL Paint Color Generator spinner wheels. The color generated here is a kind of yellow/gold with full saturation and value, full shine but no flake (due to the the Flake/Shine wheel landing on Full on its first spin, leading to a 1.00 value for shine, and the second such spin of the same wheel yielding a result of None, leading to a 0.00 value for flake), and no pearl effect.

The results of the CEL Paint Color Generator can also be applied to a randomly generated car from the main CEL Challenge spinner wheel. If you wish, try generating a random color that would be a realistic option for the car created from the CEL Challenge. Have fun exploring the possibilities!

Tuesday, October 25, 2022

Wanton Destruction on a Galactic Scale: When is it a Good Idea, and When is it Not?

Wanton Destruction on a Galactic Scale: When is it a Good Idea, and When is it Not?




I've already explained in earlier posts how you can obtain (and use) a Limited Vacuum Collapser more than once in Infinite Space III: Sea of Stars, but this time I'll show you why allowing a player to do so more than twice would not be a good idea. To give you an example, here are several screenshots from a recent game I completed.






A Limited Vacuum Collapser is not something to be used lightly - it must be set up so that it detonates at the right place and time - but it's sure to produce spectacular fireworks when it goes off.

In the game described here, I found a Limited Vacuum Collapser in the Duet star system, and I immediately headed to the Tchorak home system to find out if a Kawangi Dreadnought would visit it (or any other star system on the opposite side of the map from the Terran home system of Glory). My hunch turned out to be correct, so I decided to detonate the Collapser in the Viveka system (which was less than five light-years away from the Tchorak home system, and also close enough to Duet to ensure that both systems would also be caught in the blast). The resulting vacuum collapse not only erased both the Tchorak home system and the Kawangi dreadnought from existence, but also destroyed a Muktian flotilla that didn't evacuate in time. In addition, the destruction of the Duet system prevented me from exploiting the Kawangi respawn bug, but I didn't care.

Later on in the game, I discovered a Timeless Bauble, and decided to use it to create another Limited Vacuum Collapser. This time, I decided to detonate it in orbit around the black hole Monstro, after realizing that the Urluquai and Tan Ru home systems were less than five light-years away from it. Keeping this knowledge in mind, I retreated to a safe distance and watched the fireworks as two hostile factions - and three whole star systems - were wiped off the map along with any and all flotillas within the blast radius. Fortunately, my flotilla was not among them (if it were, the game would immediately end), but that made it impossible to trade in some cargo for a piece of advanced Urluquai technology (such as a Plasma Coil Cloaker) from then on. Again, though, I did not care one bit - the 5000 credit bonus for destroying a Kawangi Dreadnought was more than enough to field and heavily upgrade a fleet of two Terran Frigates, a Garthan Frigate, and a Calatian Cruiser. Besides, I had already purchased enough Cloakers to equip each and every one of my capital ships (i.e. anything larger than a fighter but is not a space station) with one of these devices.






Using a Limited Vacuum Collapser to destroy a home system (or, in rare circumstances, more than one of them) is not a good idea (especially if any of them is your own, or that of any faction that starts out neutral or allied), but if any the system(s) in question is/are those of an initially hostile faction, it may well be worth it - especially if their flotillas are also caught in the blast.

All told, I destroyed six star systems (including three alien home systems), one black hole, and four flotillas (of which one was comprised solely of a Kawangi Dreadnought) in this game. It is worth noting that in Sea of Stars' predecessor, Weird Worlds, using a Limited Vacuum Collapser is treated in-universe as a last resort, since such acts of wanton destruction would have incurred a 1000-point penalty apiece at the end of the game, but for some reason, this rule no longer applies in Sea of Stars.

This brings us to the topic of this post: What if you could detonate a Limited Vacuum Collapser more than twice in the same game? Well, for starters, it would not be a good idea: every randomly generated map in Sea of Stars initially contains 32 star systems and 5 black holes, and since an LVC detonation is guaranteed to permanently remove at least one of the former from the map (although depending on where the epicenter is, such a cataclysmic event could destroy more star systems at once, in some cases up to five or even six), a double LVC explosion will reduce the number of systems to 30 at most. Taking the game described above as an example,  I erased three systems from the map with each use of the LVC (6 in total), leaving 26 systems still on the map, and there was a huge void of empty space where those annihilated systems used to be. Worse yet, if each detonation had destroyed six systems each instead of three, there would have been only 20 stars left on the map.

Taking the idea further, giving a player an infinite supply of Limited Vacuum Collapsers would make it possible for them to destroy the entire sector (or at least annihilate every star system that isn't Glory) which would make the game unwinnable. Even with one LVC "explosion", you're looking at up to just under a quarter of the sector gone in a flash - and with two detonations, up to a little over a third of the map's star systems will be lost forever in total. Moreover, if you haven't explored any or all those systems before they disappeared from the sector map due to the vacuum collapse, you will never be able to do so for the rest of the session, which may make the game harder (or even impossible) to complete depending on what was spawned there at the start, and even if it doesn't, it reduces the number of star systems you can explore, which will reduce your final score, of which exploration contributes a significant amount.

And what if the Limited Vacuum Collapser's area of effect were changed in size? Consider what would happen if an LVC wiped out a larger part of the map with each blast. For example, if the blast radius of an LVC were to be doubled in size (to 10 light-years instead of the usual five), you'd erase much more of the sector with each detonation, and have far more difficulty escaping from the blast zone - as well as placing your own system (Glory) at greater risk of destruction each time. On the other hand, reducing the blast radius, say to three light-years, would make the LVC more of a precision weapon, with no chance of collateral damage (since all star systems on the map must be at least three light-years apart from each other), by completely removing its ability to destroy any star system other than the one in which it was detonated. This, however, would also create at least as many problems as it could potentially solve, such as having to be far more precise with the location and timing of the blast to take out an invading Kawangi dreadnought, so in general, changing the blast radius of an LVC would not be a good idea.

Overall, it's a good thing that none of the games in the Infinite Space trilogy will allow you to cause more than two localized vacuum collapses (with a blast radius of five light-years each) in the same session. The series as a whole was (and still is) mainly about exploring distant star systems, not destroying them; as such, excessive wanton destruction would largely defeat the whole point of the game. To ram the point home, the Limited Vacuum Collapser and Timeless Bauble (the latter of which may be used to create another LVC) do not always spawn on the map when starting a game, and if the former is present, its use is not always required to actually complete the game; in Sea of Stars, you may even sell it at Glory for 1000 credits if you're short on cash. So while it's great to know that you can annihilate an entire star system (or several of them) at the push of a button, you'll be glad that doing so isn't necessary for complete mastery over the Sea of Stars.

Monday, October 24, 2022

Confessions of an Automationeer, Part 122: Hatching a Plot

Confessions of an Automationeer, Part 122: Hatching a Plot

After taking a break from QFC 11 having hosted QFC 10, I jumped at the chance to enter the very next QFC, which was themed around early 1990s hot hatches. It took me several days to come up with an entry, and after several revisions, I ended up making a small but hard-edged pocket rocket: the AMS Vanga 2.0 RS.


Do not be fooled by its small size - the AMS Vanga 2.0 RS has a big heart to match its appetite for corners.

I had originally planned to use a 1.8-liter straight-four for this build, but after evaluating the strengths and weaknesses of the other entrants, I went with a 2.0-liter unit instead.


Small in displacement but packed with power (for a normally aspirated engine of this size and era) - that's the Vanga's engine in a nutshell. (Since this screenshot was taken, I changed the name of both the engine family and variant along with the color of the valve cover, which is now red instead of yellow.)

The Vanga was meant to be a true driver's car, and it shows. To remain within budget, I had to remove the center rear seat, power steering, and anti-lock brakes (although I stated that all of these items were optional); it did, however, come with a mid-range stereo and cassette tape player. As for the rest of the car, I decided to tune the suspension (struts up front and a torsion beam in the rear) mainly for performance (without sacrificing too much comfort) and install large vented disc brakes on all four corners. To send all that power safely to the front wheels, I fitted a close-ratio 5-speed manual gearbox and a geared limited-slip differential.

All in all, at $21,000 AMU when new, the ultimate version of the Vanga is a very good deal in terms of value for money - not even the compromises made in creature comforts are enough to mark it down, if you are willing to accept them.

While this version of the Vanga didn't make the top 5, it did leave behind a positive impression on the client. It wouldn't be the only trim, though: I also made a Touring spec (with ABS, power steering, a fifth seat, and more safety equipment as standard - all of those were optional on the base model) for those who wanted a more livable choice.


The Touring spec - not as raw as the base model, but a better everyday proposition.

At $23,500 AMU, the Touring spec is not that much more expensive than the base model, and while it is not quite as hard-edged due to its extra weight, it's still a highly capable pocket rocket.

Thursday, October 20, 2022

Confessions of an Automationeer, part 121: A Dip in the (Tech) Pool

Confessions of an Automationeer, part 121: A Dip in the (Tech) Pool

We have already discussed the recently introduced Automation sandbox tech pool, a feature that can be used to accelerate the development of specific components, thereby ensuring earlier availability of certain items in that category. This requires the use of positive tech pool points, of which you can assign up to 15 for any given component. Speaking of components, the tech pool chart lists a total of 16: 6 for the engine (block/head, bottom end, top end, turbocharger, fuel system, and exhaust) and 10 for the car (body, chassis, drivetrain, wheels/tires, brakes, aerodynamics, interior, safety, assists, and suspension).


A glued aluminum chassis shouldn't be available in 1999...

For example, a glued aluminum chassis is normally available only from 2000 onwards. However, with the use of the tech pool, you can select it at an earlier year than usual. Taking the 15-point limit into account, it is possible to have this option as early as 1985. Granted, this is highly unrealistic, but the fact is that you no longer have to wait as long in-game as before to utilize this expensive weight-saving technology for a sandbox build.


...unless, of course, you advance the chassis tech pool by 1 year.

But what about using the tech pool to have the opposite effect by adding negative points? This could actually serve a purpose in-game by simulating the effects of a company introducing a specific item later than the usual industry standard. And whereas positive tech pool points reduce production units, engineering time and overall cost, negative tech pool points will increase all of those. 

There is a catch, however: The most recent in-game year for a car and its engine is 2020, so in theory, using the negative tech pool to delay the availability of any item to after 2020 will effectively make that item impossible to use. To give another example, the luxury HUD-based infotainment system is only available from 2017 onwards, so using a negative tech pool value of -4 for the interior would prevent it from being selected at all, even if the trim year is set to 2020.

Taking all of the above into account, if negative tech pool points are ever implemented in Automation, it would introduce the possibility of a third scenario: assigning positive points to some components and negative points to others. This is intriguing, to say the least, since a company could, in theory, be ahead of the industry standard in some areas and behind in others. As such, simultaneous use of positive and positive tech pool points would be the only way to simulate this situation.

This brings us to the concept of a net tech pool, which would be the sum of all tech pool points across all categories. The resulting value would determine how far ahead or behind the industry standard a company would be overall. For any given car, its overall net tech pool value would be the sum of the net tech pools for the trim and engine; if this value is negative, then its manufacturer is generally playing catch-up research-wise, but if this value is positive, then its manufacturer is generally on (or ahead of) the cutting edge of research.

In short, implementing negative tech pool values would open up a whole new set of possibilities, from merely simulating a company lagging behind research trends, to offsetting positive tech pool points elsewhere in fan-made challenges that allow tech pool adjustments within a set net tech pool limit.

Thursday, October 13, 2022

A Lifer's Diary, Part 2: Wheely Good Fun

A Lifer's Diary, Part 2: Wheely Good Fun 

Shortly after making a set of spinner wheels for simulating a Game of Life using the Generation III rule set, I came up with the idea of doing the same for the earlier Generation II rule set. Here it is:


A set of spinner wheels that can be used to simulate a Game of Life using the Generation II rule set. This time, there are only six wheels, including one each for every career, salary and house present in this version of the game.

In this version, there are a total of six wheels; they are as follows:
  • Spin: Created to simulate the spinner in the real-life board game (or a 1d10/10-sided die, which is functionally identical if you treat the 0 as 10), each player must spin this wheel once at the start of their turn. In addition, each player must spin this wheel once at the very start of a game to determine the order in which they take their turns. Any player who lands on the Pension space must also spin this wheel once, after which they will earn $20,000 multiplied by the number they spun (compared to $10,000 per number spun in Generation III).
  • Start/Choice: This determines whether or not a player goes to college at the start of a game, and whether or not they take the longer of the two routes when they reach a fork in the Path of Life. It is also used to determine whether or not a player will follow the instructions on a blue space (Night School and Trade Salary Card) upon landing on them.
  • Salary: When selecting a new salary (unless going to College or entering Night School), a player must spin this wheel once. If going to College or Night School, spin this wheel three and two times respectively, discarding a result if it is already taken.
  • Career: When selecting a new career (unless going to College or entering Night School), a player must spin this wheel once. If going to College or Night School, spin this wheel three and two times respectively, discarding a result if it is already taken or if the spinner lands on a career that requires a college degree, but the player whose turn it is currently lacks a degree.
  • House: Each player must spin this wheel once when they land on the Buy a House space, discarding a result if it is already taken. Note that the "sell house for 150% of its original value upon retirement" house rule is optional, but I would prefer to implement it to incentivize purchasing the more expensive houses.
  • Life Tiles: As with the wheel of the same name from the Generation III set I made earlier, each space on this wheel represents a different Life Tile denomination and how many times at most it can be spun. When all players reveal the values of the Life Tiles in their possession, spin this wheel once for every Life Tile they have, but if the spinner lands on a space for which you have reached the maximum number of spins (3 spins for $250k, 4 spins for $200k, 5 spins for $150k, 6 spins for $100k, and 7 spins for $50k), spin again until it lands on a value for which you have not reached the spin limit for that denomination. Note that all Life Tile values are 5 times larger in Generation II compared to those Generation III.
With this set of spinner wheels, I can finally simulate a Game of Life using the Generation II rule set - the first one I grew up with. It's a simpler set compared to the one I made for Generation III (6 wheels instead of 8), but it works equally well for its intended purpose.

Wednesday, October 12, 2022

A Lifer's Diary, Part 1: New Set Of Wheels

A Lifer's Diary, Part 1: New Set Of Wheels


Not long after discovering the spinner wheel set used for the CEL Challenge, I quickly realized that it could be used to simulate Hasbro's Game of Life. There was just one problem: there could be no more than eight wheels for any given set, but I was able to work around this. After due consideration, I came to the conclusion that Generations II and III lent themselves better to being simulated with a set of spinner wheels, so I decided to start by making a set for the former. The resulting wheels are shown below.



A set of spinner wheels that can be used to simulate a Game of Life (Generation III).

The functions of each wheel (left to right, row by row) are as follows:
  • Spin: Created to simulate the spinner in the real-life board game (or a 1d10/10-sided die, which is functionally identical if you treat the 0 as 10), each player must spin this wheel once at the start of the game to see who goes first, and at least once for every player as they move along the board. Also spin this whenever any player lands on the Pension space, or is in a Spin to Win.
  • Start/Choice: Spin this wheel once for every player at the start of their first turn, to determine whether or not they go to college; if they do so, they must borrow $100,000 to pay their tuition fees. The result of such a spin determines which one of the next two wheels is spun when that player gets to choose a career. In addition, this wheel is used to simulate a player's choice between taking a new college career or a $20,000 Pay Raise for their current one. Under this circumstance, the "Career" option simulates the Pay Raise, and the "College" option simulates the career change (although this is not available if all other College Careers are taken, in which case the "Career" option will be chosen automatically). This wheel also simulates whether or not a player makes certain decisions upon reaching a Stop Space other than the first two on the board, such as returning to school, taking the Family Path, trading up to a House, and taking the Risky Path of Life: in this case, if the spinner lands on Career, the player rejects the offer, but if the spinner lands on College, the player accepts the offer.
  • Normal Career: This wheel can only be spun whenever a player chooses a normal Career Card. Note that any player who does so when landing on a Lose Your Job space must immediately return all of their Pay Raises to the bank. Each space on this wheel shows a different Career and its corresponding salary range. If the wheel lands on a space that represents a career belonging to any player (including the one whose turn it is), spin again until it lands on a space representing a currently unused Career (unless all other normal Careers are taken, in which case this wheel will not be spun; instead, that player must retain their current Career, but they must also return their Pay Raises as usual).
  • College Career: This wheel must be spun twice (or once if only one College Career is available) whenever a player chooses a College Career Card. Note that any player who does so when landing on the Change Career space must immediately return all of their Pay Raises to the bank. Each space on this wheel shows a different College Career and its corresponding salary range. For each spin of this wheel, if it lands on a space that represents a career belonging to any player (including the one whose turn it is), spin again until it lands on a space representing a currently unused College Career (unless all other College Careers are taken, in which case this wheel will not be spun; instead, that player must retain their current College Career and receive $20,000 in Pay Raises).
  • Share The Wealth: Spin this wheel three times for each player at the start of their first turn, and once for whenever a player lands on a Take a Share The Wealth Card space.
  • Starter Home: Any player who lands on the Buy a Starter Home space must spin this wheel once to determine the Starter Home they will buy. Each space on this wheel shows the name of a different Starter Home, along with its purchase price and resale value. If it lands on an option that is already taken (including by the player whose turn it is), spin again; if only one Starter Home is available, it will automatically be sold to that player. Note that Starter Homes are mandatory purchases; Houses are not.
  • Life Tile Value: Each space on this wheel represents a different Life Tile denomination and how many times at most it can be spun. When all players reveal the values of the Life Tiles in their possession, spin this wheel once for every Life Tile they have, but if the spinner lands on a space for which you have reached the maximum number of spins (3 spins for $50k, 4 spins for $40k, 5 spins for $30k, 6 spins for $20k, and 7 spins for $10k), spin again until it lands on a value for which you have not reached the spin limit for that denomination.
  • House: Any player who lands on the Buy a Better Home space must spin this wheel once if they choose to trade in their Starter Home for a new House. Each space on this wheel shows the name of a different House and its purchase price (the latter of which is also identical to its resale value). If it lands on an option that is already taken (including by the player whose turn it is), spin again; if a player reaches the Buy a Better Home space when only one Starter Home is available, it will automatically be sold to that player. Note that Houses are optional purchases, unlike Starter Homes.
With the set of spinner wheels described above, I hope I can more easily simulate this version of the Game of Life than ever before. In fact, I could create a similar set for Generation II, but any versions of the Game of Life from Generation IV onwards (as well as Generation I) may be less well-suited for such a project; as such, I have less interest in making spinner wheel sets for those. Even so, if and when I choose to simulate another Game of Life (using the Generation III rule set), I will certainly use this specific set of spinner wheels.