Monday, October 10, 2022

Confessions of an Automationeer, Part 120: Powering Up

Confessions of an Automationeer, Part 120: Powering Up

Now that Automation has received several very significant updates in the past few weeks, I feel like it is the right time to describe some of them in more detail. Their combined effect is that we, as players, must now rethink how we build cars and engines compared to previous builds. This has happened before in the past, but seldom on a scale as large as this. On that note, let's take a closer look.


The revised bottom end tab in the engine designer for Automation LCV 4.2.23 and up, showing the new balancing mass slider - more mass equals greater reliability and smoothness, while less mass equals less weight and better throttle response.

The first major update to Automation in some time (LCV 4.2.23) has brought with it a complete overhaul of how engines work, thereby making them more realistic than before. For starters, engine data is calculated for 1% throttle increments as well as for every 100 rpm. You can now adjust more stuff than before, such as carburetor, header and intake manifold sizes, as well as the VVL activation point on the rev range, and bottom end balancing mass weight. 



The top end tab has also been revised to show RPM limit and VVL activation RPM sliders. A fueling map is also shown here.

In addition, there are some new fuel types to choose from, and there are now three cast-iron header types (compact, low and mid) instead of two. There are many other improvements as well, and the air/fuel ratio slider is now a fuel map slider, while the ignition timing is automatically adjusted (hence the absence of an adjustment slider, as had been present in previous builds).


A timing map is also new for 4.2.23 and up, while the turbocharging tab (ghosted here due to the engine shown here being normally aspirated) allows for boost adjustments in increments of 0.05 bar.

To accompany these changes, there are now additional graphs for various attributes; moreover, flow ratings are now shown as percentages of optimum air flow (the closer to 100%, the better). On top of this, the maximum RPM slider is now in the top end tab, and a whole new set of warnings have been added. Overall, designing a viable engine for any application is now more challenging, but also more rewarding than before.





Above, from top: Other new stuff introduced in LCV 4.2.23 - graphs for flow utilization, fuel efficiency and friction mean effective pressure, plus several more sliders for carburetor, intake manifold, exhaust header and exhaust pipe size. The fuel mixture slider is now a fuel map slider, while the ignition timing slider has been removed to account for the fact that ignition timing is now adjusted automatically. There is now an octane margin setting, and cast headers come in compact, low-RPM, and mid-RPM varieties, while the standard tubular headers are now referred to as Tubular Mid. Finally, there is a 4 Split Mode for viewing graphs, which shows output, timing, fuel efficiency and flow utilization graphs all at once.

The trim section of the car designer has also been revamped for the latest build. In addition to the inclusion of a selectable fuel efficiency graph (which aids in configuring gearing for economy, if you need or want it), the minimum rear braking force has been reduced further, to 20% of its maximum value. Also, throttle response now affects sportiness and wheelspin: the more responsive an engine is, the sportier it will be (and the more wheelspin it will generate).


The transmission tab has been updated for LCV 4.2.23, and shows an option for a clutched LSD - less effective than a geared equivalent, but available sooner. A fuel efficiency map is also shown here.

Furthermore, the fixture tab now has a new set of buttons and commands (such as clone in place and flip with mirroring), while fixtures, paints, advanced trim settings and morphs can now be copied through the clipboard and even other cars. Speaking of advanced trim settings, they now include tire shine and tread depth settings, both of which can be adjusted through sliders. In addition, all calculations have been reworked in this new build, and some new bodies have been added in addition to, or in place of, existing ones that have been present for quite some time.


Additional options (such as cloning in place and flipping to the opposite side) have been added to the fixture manipulation section of the fixtures tab.

After the release of LCV 4.2.26, engines are now even more realistically depicted than before. For example, direct injection has been nerfed slightly, minimum boost is now 0.05 Bar (with boost now being adjustable in increments of 0.05 Bar) while standard manifolds have had their airflow buffed, and all mufflers and catalytic converters now have backpressure effects, with torque outputs being increased slightly across the board to account for this. In addition, advanced automatic transmissions can have up to 10 gears (depending on the era), while dual-clutch transmissions can also have more gears. As for suspension tuning, the maximum value for springs and dampers is now 20 instead of 10.

The most significant change stemming from this update is the addition of a new feature to the sandbox: the tech pool. It is meant to simulate the amount of R&D a manufacturer has undertaken, often for the purpose of reflecting the company's lore. This reduces production units and engineering time for a specific component, but more importantly, unlocks certain parts sooner by shifting the year for that part forward by a set number of years. 


Introduced in LCV 4.2.26, the Tech Pool is a new feature that allows you to unlock some parts sooner - you can even copy and paste tech pool values between trims. By default, each part has a tech pool value of 5, although you can change this as you see fit.

With this in mind, you can also copy tech pool settings to the clipboard for future use, and paste them if you want to reuse them on another car trim or engine variant as you see fit. Before this update, all components were treated as having a tech pool value of 0 outside of the campaign mode; now, however, the default tech pool value has been set to 5 for all components. However, some forum challenges require a tech pool value of 0 across the board, in a nod to earlier versions.

The next update, LCV 4.2.27, brings with it even more changes to trim options and availability. For one, manual and (non-variable) hydraulic steering options have been split into two types each: recirculating ball and rack and pinion, with the latter providing better stats at the expense of generally higher cost. In addition to this, a clutch-based limited-slip differential is now available. The clutched LSD (as the game puts it) is more primitive than a geared equivalent, but is unlocked earlier. This avoids having to substitute an automatic locking differential (normally best suited for off-road applications) for a true geared LSD in earlier years (pre-1982 if the drivetrain tech pool is set to 0). Moreover, a clutched LSD is generally cheaper to develop than a geared one, and provides better off-road capabilities at the expense of inferior drivability.


LCV 4.2.27 introduced options for recirculating ball or rack and pinion steering for manual (i.e. unassisted) and regular hydraulic (i.e. non-variable) steering systems. 

From version 4.2.28 onwards, there is now an advanced trim setting that allows you to move and scale every fixture on a given trim at once, and copy them to another, different trim - far faster than having to duplicate each fixture separately from scratch.



Above, from top: It is now possible to scale and move every fixture at once, as well as copy and paste fixtures, materials, advanced trim settings, and morphs from the advanced trim settings menu.

In addition to these updates, the developers have also released some minor patches to fix any bugs present. The effect of these is to provide a more stable and cohesive experience overall. When combined with the various major updates described above, building a car (and its engine) in Automation is now a generally more enjoyable experience - and this will be even more true once the current open beta build becomes stable enough to become the latest public release.

Update (12:00 am, UTC +7): LCV 4.2.30 introduces AFR (air/fuel ratio) dependent combustion chamber cooling effects, reducing the probability of knocking. In addition, carburetor flow and manifold/header resonance curves have been adjusted slightly to account for this, and there are several minor bug fixes as well.

Friday, October 7, 2022

Confessions of an Automationeer, Part 119: Randomizer II

Confessions of an Automationeer, Part 119: Randomizer II

I just found out that the creator of the CEL Challenge also created a set of spinner wheels for a random engine generator - a link to these wheels can be found here. You can also find an example of a randomly generated engine based on the criteria from the wheels in this video. Now, about the wheels themselves: Unlike in the CEL Challenge, there are eight wheels (the maximum the site will allow), and they are as follows:

  • Engine Type: The arrangement of the engine's cylinders. This can range from an inline-3 to a V16 and anything in between - in fact, every engine layout in Automation is accounted for.
  • Engine Size: Determines the total displacement of the engine. There are several displacement brackets, from sub-1-liter to 15-20 liters. If any displacement within the range of the bracket is impossible to attain with the configuration generated, spin again.
  • Material (spin 2 times): The material used for the block (1st spin) and heads (2nd spin).
  • RPM: The RPM limit for the engine. There are several brackets, from sub-2,000 RPM to 10,000-12,000 RPM.
  • Head: The type of head the engine has. All options (from pushrods to DOHC with 4 or 5 valves per cylinder) are supported.
  • Bottom End Parts: Determines the set of bottom end parts (crank, conrods, pistons) that will be used. There are four options: Cast (includes hypereutectic and low-friction pistons), heavy-duty cast (for conrods and pistons), forged, and lightweight forged (which includes titanium conrods and billet steel cranks)
  • Cams and Headers: The type of headers used, if the engine is naturally aspirated. All in-game options are supported. (As of LCV 4.2.23, Cast Log is now Compact Cast, and Short Cast has been split into Cast Low and Cast Mid, while standard Tubular is now Tubular Mid.)
  • Fuel System: The type of fuel system the engine will use. As with Cams and Headers above, all in-game options are supported, from single-barrel carburetors to direct fuel injection.
Unlike in the CEL Challenge spinner wheel set, the Random Engine Generator does not have a wheel that determines the choice of era, since the unlock year varies greatly from item to item. For example, Direct Injection is not available until 2001, assuming a fuel system tech pool value of 0. Speaking of Tech Pool, I am assuming that the entire set was made under the assumption that all engine tech pool values are 0, which prevents parts from being unlocked earlier than they were before the tech pool was implemented. Finally, if you choose to spin the wheels one at a time instead of all at once, you should do so from left to right, row by row.

Below is an example of a combination randomly generated using the Random Engine Generator wheel set.


An example of a randomly generated combination of engine components, created using the Random Engine Generator spinner wheel set. Here, it shows a V8 with a displacement of 3 to 6 liters, with aluminum/silicon alloy for the block and/or heads, an RPM limit between 8,000 to 10,000 RPM, 4- or 5-valve DOHC heads, lightweight forged internals, variable valve lift (either in addition to, or in place of, variable valve timing), and multi-point fuel injection.

It is possible to use both sets in conjunction with each other for a combined random car/engine combination, although the result will often be anachronistic without (and sometimes even with) use of the tech pool.

If you had fun with the CEL Challenge spinner wheel set, be sure to try the Random Engine Generator spinner wheel set - it's a blast to play with!

Wednesday, September 7, 2022

Confessions of an Automationeer, Part 118: Bubble

Confessions of an Automationeer, Part 118: Bubble

Having already described my entry for QFC9, I am now going to showcase my entry for the preceding QFC, in which the design brief called for a 4-door, 5-seater executive car. With this in mind, I made the KMA K50 3.0 - a large sedan with a proper luxury interior and a sound system to match.


The KMA K50: proof that even in the luxury car market, the simplest solutions may be the best ones.

Built on sound underpinnings (a galvanized steel monocoque with some alloy panels and double wishbone suspension at each corner), the K50 is powered by a normally aspirated 200-bhp 3.0-liter straight-six driving the rear wheels via an electronically controlled 4-speed automatic transmission. Brakes are vented discs all around with ABS as standard, while a driver's airbag was also fitted.


The lavishly appointed interior of the K50 is packed to the gills with all the advanced technology anyone could expect from a car of this type and era.

I designed the K50 to be simple, and it shows: by eschewing the advanced adaptive dampers and hydropneumatic or air springs of some of its rivals, and tuning the suspension mainly for comfort, I ended up with a $35,000 car (in 1988 AMU) that managed to finish a very honorable third place overall. In short, the K50 is great value for money, and does well enough to satisfy the head as much as the heart.

Tuesday, September 6, 2022

Confessions of an Automationeer, Part 117: CEL Challenge Revisited

Confessions of an Automationeer, Part 117: CEL Challenge Revisited

Earlier in this series, I discussed the set of spinner wheels used for the CEL (Class, Era, Location) Challenge and how they work. Now, after several weeks, I have decided to return to it, because there is one new entry on the Class spinner: Concept Cars. I take this to mean one of two things:
  • any car that is not a production car, but will influence future production cars in some way; or
  • a bespoke one-off or low-volume build for a specific customer or set of customers.

Above: An example of a CEL combination with the revised Class spinner, in which Concept Cars was the chosen class.

All the rules stated in the previous post about the CEL Challenge still apply. However, I would like to suggest a new, optional house rule in which any Lucky and/or Unlucky options incompatible with (or at least highly out of place for) the selected era must be ignored, i.e. the requirement to follow them is waived under such circumstances. Obviously, this rule does not apply if the Luck spinner (second from the left in the bottom row) lands on Neither. As an amendment to this rule, if the Luck spinner lands on Both, ignore the Lucky and Unlucky options if they are incompatible with each other. The effect of this is to avoid having to generate a new CEL combination if any of the above situations arise.


Above: Under the new optional house rule, you may choose to ignore any Lucky and/or Unlucky options that are incompatible with the selected era. In the example shown above, "Everything" refers to all Lucky options, including AWD - something that does not exist in the Oil Crisis era. As such, instead of generating a new CEL combination, you may use the current one, but with the Lucky option completely ignored if the house rule is in effect.

Every other spinner remains unchanged, so there is no need to discuss them further as yet.

Thursday, September 1, 2022

Confessions of an Automationeer, Part 116: Able Archer

 Confessions of an Automationeer, Part 116: Able Archer

Today is the 1st of September, which marks the unofficial start of autumn in the Northern Hemisphere (or spring in the Southern Hemisphere). To mark the occasion, I have chosen to show another recent build of mine: the AMS Archer R. This mid-engined supercar (or hypercar depending on your view) was originally created as my entry into the ninth Quick Fire Challenge, and holds a special place in my heart for being the first mid-engined supercar for which I have ever created a detailed interior.






Above, from top: Various angles of the AMS Archer R, a mid-engined supercar of the mid-2000s with the heart of a savage beast.

The Archer R is powered by a 6.0-liter naturally aspirated V12 delivering 660 horsepower to the rear wheels via a six-speed manual gearbox. Such immense power yields a top speed of 230 miles per hour and a 0-60 mph time of just 3.2 seconds. To harness this much thrust, the Archer R uses pushrod-actuated suspension at all four corners, tuned for exhilarating performance on any road or track. Huge vented disc brakes at each corner are essential for keeping this much grunt in check; as such, the Archer R comes equipped with them as standard. In addition, its racing-inspired aerodynamics (including an active rear wing) provide unparalleled stability at any speed, while its full carbon-fiber monocoque structure keeps the weight down to under 1.3 metric tons. Finally, the occupants are treated to a truly luxurious interior, which uses only the finest genuine materials and includes a top-end sound system with satellite navigation.




Above, from top: An overview of the interior of the AMS Archer R.

I had a lot of fun making this build - stay tuned for more build showcases on this blog in the coming weeks.

Monday, August 15, 2022

Confession of an Automationeer, Part 115: A Birthday Gift

Confession of an Automationeer, Part 115: A Birthday Gift

In the previous post, I introduced you to the website that spawned the CEL Challenge, where you are required to build a car in Automation based on a randomly generated set of requirements, including a specific class, era and location. With this in mind, I clicked on the Spin All button, and ended up with a 1990s British sports car. As promised, the resulting build will be the subject of this post, so here it is: the 1995 Wolfram Warhawk GTS. I am presenting this in celebration of my 30th birthday - I originally made this for the 2022 Automation Virtual Car Meet which I also mentioned earlier in this series, but the time has come for it to get its own post.






Above from top: This is the Wolfram Warhawk GTS - a British sports car of the 1990s, which I had built as part of my own personal CEL Challenge.

The Warhawk is powered by an all-aluminum, 5.0-liter, naturally aspirated, 32-valve, dual-overhead-cam 90-degree cross-plane V8 delivering 400 horsepower and 350 foot-pounds of torque to the rear wheels via a six-speed manual gearbox and a mechanical limited-slip differential.





Above from top: The interior of the Warhawk. The gaps in the windows are due to my decision to use the same glass material for all the trim slots (except for the underbody) as the windows themselves, giving a very airy feel.


Here is an overview of the trim setup of the Warhawk:









Above: An overview of the mechanical setup and basic configuration of the Wolfram Warhawk GTS.

This concludes our showcase of a CEL Challenge build. And, as I have stated before, it's my 30th birthday, so don't forget to send me your best wishes!

Confessions of an Automationeer, Part 114: Randomizer

 Confessions of an Automationeer, Part 114: Randomizer


I recently discovered a site that served as the basis for the Automation challenge found in this video - the CEL Challenge. When you visit it, you will be greeted by six spinner wheels arranged in two rows of three. As shown in the screenshot below, the upper row contains the three main wheels. The first wheel indicates the vehicle's Class, the second wheel refers to its Era, and the third wheel refers to its Location. The lower row contains a set of optional wheels representing secondary requirements. The Unlucky Wheel (left) indicates a negative trait that hinders the vehicle, the Lucky wheel (right) indicates a positive trait that benefits the vehicle, and the Luck wheel determines which of the requirements shown wheels either side of it, if any, will affect the build. In addition, there is a button at the top-left corner marked "Spin All", which spins all six wheels at once.


An overview of the CEL Challenge spinner wheels. The upper row contains the primary set of spinner wheels used for a random Automation build suggestion in the CEL Challenge, from left to right: Class, Era and Location. The screenshot shown above indicates that the randomly generated build suggestion would be a 1990s Italian supercar - a highly desirable combination in real life (and a realistic one as well). The lower row contains the secondary set of spinner wheels used in the CEL Challenge, from left to right: Unlucky, Luck and Lucky. Here, the Luck spinner landed on Lucky, so the effect of the Unlucky spinner (left) can be ignored, but the effect of Lucky spinner (right) had to be taken into account - in this case there is no limit to the budget for the build.

If you click on the "Spin All" button, all six spinners will be shown at once, and the results will be shown after a few seconds. Examples of the combinations that can result are shown below.


An example of realistic (above) and unrealistic (below) CEL requirements generated by the "Spin All" button.




Regarding the Luck spinner, it may provide benefits and/or handicaps to the build. If it lands on "Lucky", only the effects of the Lucky spinner can factored in; if it lands on "Unlucky", only those of the Unlucky spinner are taken into account; if it lands on "Both", the effects of both the Lucky and Unlucky spinners will be considered; finally, if it lands on "Neither", neither of those spinners' effects will affect the build. In fact, it is possible to end up with secondary requirements that range from the appropriate (such as automatic transmission on a luxury sedan) to the unrealistic (such as semi-slicks on a 1940s truck) and the utterly incompatible (such as two-way catalytic converters for any class, in any era before the 1970s). If you end up with a set of incompatible requirements, you should start over from the beginning.


Above: An example of a set of CEL requirements in which the effects of the Unlucky spinner apply, but are actually beneficial when the result of the Class and/or Era spinner(s) is/are taken into account. Below: A set of incompatible CEL requirements. Although the era is set to the 1940s, the secondary requirement for 2-way catalytic converters (which are not available in that era) also applies, and as such, an Automation build fulfilling both requirements is actually impossible.


Here is a brief explanation on some of the possible CEL options, assuming tech pool values of 0 for all engine and trim sections:
  • The Supercar class includes hypercars. Also, if the Class spinner lands on Luxury, you must spin the Class spinner once more to determine a specific class for your random build suggestion.
  • The Oil Crisis era can be seen as a subset of the 1970s, spanning the years 1973 through to 1975 inclusive.
  • The 2010s is not represented on the Era spinner, presumably because in some ways, it is too similar to the 2020s to merit inclusion.
  • Regarding the Location spinner, Oceania could be interpreted to refer to Australia and New Zealand. South America, meanwhile, mainly refers to Brazil and its neighbors (such as Argentina, Paraguay and Uruguay), and Asia could be represented by much of East and Southeast Asia, excluding China and Japan (both of which are separate options).
  • With regards to Unlucky and Lucky options, "12k Costs" should be interpreted as a maximum approximate cost of $12,000, and "Lowest Fuel" should refer to 85 RON low quality unleaded fuel, whereas "Unlimited Fuel" can refer to a complete absence of octane limits. Speaking of fuel, "Oil Crisis" sets the era to Oil Crisis (which encompasses the years 1973-75 as described above) regardless of where the Era spinner originally landed on. 
  • "-5 Quality" imposes a maximum quality of -5 on every slider; "+5 Quality", on the other hand, imposes a minimum quality of +5 on every slider. The "+15 Quality" and "-15 Quality" options, meanwhile, refer to applying the required amount of quality to all sliders (unless otherwise specified by the builder). It should be noted that each positive quality option is incompatible with a negative quality option and vice versa, nor is the "12k Costs" option compatible with the "Unlimited Budget" option, and the highest and lowest-quality options always take precedence. Finally, the "Lowest Fuel" option is incompatible with the "Unlimited Fuel" option.
  • In the sandbox mode, automatic transmissions of any kind (as distinct from automated manuals and dual-clutch transmissions) are not available before 1950, nor are 2-way catalytic converters available before 1972. Also, in real life, the latter were phased out by around 1981 as emissions standards became ever stricter. In addition, carburetors of all types would be banned altogether in many markets from the 1990s onward for the same reason. Finally, cross-ply tires were universally available in the 1940s and 1950s in many markets, but became less common from the 1960s onward, before generally disappearing altogether by the end of the 1970s.
  • If desired, the "Automatic" option can refer to a regular (not advanced, auto manual or dual clutch) automatic transmission with 3 speeds or fewer.
  • FWD is available from the outset (albeit only for longitudinally mounted engines - transverse FWD is not introduced until 1961), but AWD configurations for longitudinally and transversely mounted engines are not available until 1981 and 1990 respectively.
  • The Luck spinner can yield any one of the four options: Unlucky, Lucky, Both or Neither, the results of which are described above.
  • The "20 Fixtures" option (which limits a build to a total of 20 fixtures) for the Unlucky spinner is incompatible with the "Unlimited Fixtures" option for the Lucky spinner. Likewise, FWD and AWD are incompatible with each other.
  • When creating a CEL combination, you have two options: either you ignore the effects of the second row of spinners, or you don't. The former is preferred by newcomers, whereas more advanced users (like me) often choose to take the latter route.
  • "Change Class" requires spinning the Class spinner once to get a new result. Ditto for the "Change Location" effect, except that it requires you to do the same with the Location spinner.
  • In the context of CEL, an incompatible secondary requirement (regardless of whether it is from the Lucky spinner or the Unlucky spinner) is one that does not exist in the era that was generated.
For the sake of faithfulness to the original intent of the CEL Challenge, I shall use the full set of spinner wheels. With this rule in place, here is another example of a CEL combination I ended up with:


Above and below: Another example combination randomly generated using the CEL spinners. This one is for a 1990s British sports car, with no special requirements.


In this case the result is a 1990s British sports car, but with the Luck spinner landing on Neither, the effects of the Lucky and Unlucky spinners are ignored. The resulting car will be the result of the next post in this series.