Thursday, August 22, 2019

Confessions of an Automationeer, Part 65: Getting Schooled

Confessions of an Automationeer, Part 65: Getting Schooled

The recently concluded CSR 108 marked a milestone for me. Not only was it my first top-5 finish in a long time, it was also the first time I had collaborated with another user to develop an entry - an offer I gladly accepted at the first opportunity. Specifically, I chose to tackle the engineering aspect of the car, while my partner would work on aesthetics. This was important, since although I am quite good at exterior design, I am clearly not a patch on some of the more respected users. As for the round's premise, it was about a rally school seeking to replace its entire fleet of aging hatchbacks with several examples of a completely new car with superior economics and safety.

After accepting the deal, I began work on a test mule (which would be mechanically representative of the final build) to send to my partner. On my end, aesthetics would not matter; I only had to deal with the mechanical setup. Due to the tight budget, I opted for a simple strut front/torsion beam rear suspension on a galvanized steel chassis with treated steel panels. The engine - a naturally aspirated 1.6-liter straight-four - was moderately advanced, with all-alloy construction and variable valve timing but not lift, again to save cost. Even so, despite the addition of long-tube headers, it only made 115 horsepower, which nevertheless proved to be adequate for the client's needs.

As for trim options, the car was set up like a base-model compact car would normally be, with a manual gearbox, narrow, steel wheels wrapped in hard economy tires, small disc brakes all around, a standard interior and safety suite, and a suspension tune calibrated for a balance between sporty handling and a comfortable ride. Having fulfilled my end of the bargain, I sent the mule to my partner for an aesthetic makeover.





My first joint-venture CSR entry, the Lyon Nave 1.6 Sympathique.

After what amounted to a total aesthetic redesign (although the mechanicals and trim were left as-is), my entry reemerged as the Lyon Nave 1.6 Sympathique. Resplendent in a light metallic blue hue, it was one of the better-looking offerings in that round. Now that it had finally been submitted, I now had nothing to do but wait for the final results.

When they finally came, I felt somewhat relieved. Some entries were disqualified for simply not meeting requirements; others passed technical inspection but were deemed insufficiently worthy of further consideration. Fortunately, neither of them applied to the Nave. It was now time for the client to examine the remaining cars further, and the Nave acquitted itself very well here. Despite its modest power, it proved to be quite fun to drive, and was thus a formidable contender, almost finishing in the top three. This wasn't exactly true of a few other finalists, which turned out to be too slow and/or difficult to handle for the client's liking.


The winning car in CSR108 - the AG3 VTR - shown here driving off into the distance through the forest.

Ultimately, the winning car, the AG3 VTR, clinched the top spot by virtue of being much more fun to drive than the opposition, despite being even less powerful than the Nave - a fitting result for what turned out to be the most aggressive-looking car of the bunch. But I could hold my head high knowing that this was my best CSR result in quite some time - and the fact that it came just after my 27th birthday made it all the sweeter.

Thus ended one of the more memorable and enjoyable rounds in recent CSR history, not just for me but also for anyone and everyone involved. In the next post, I shall put an esteemed Automationeer's design studio under the spotlight.

Wednesday, August 14, 2019

Confessions of an Automationeer, Part 64: Arcade Fired Up

Confessions of an Automationeer, Part 64: Arcade Fired Up

Recently, I hosted the very first round of a new forum competition for Automationeers - the Automation Gamer Challenge. This was a recurring contest in which users are asked to submit ideas for cars that will be featured in a video game. I only took up the challenge of hosting the inaugural round simply because no other users were interested in doing so. However, I also had to come up with a rule set that everyone could agree on. After a brief deliberation, I decided on a theme that took me back to my childhood days - in a good way.

The premise was as follows: Back in 1995, the staff at a game development studio was in a grim mood, with finances running tight, but their latest game, SpeedStorm 3D, was expected to carry the studio out of the doldrums. To make that dream a reality, the dev team decided to search for cars that would be appropriate for the game. Given that SpeedStorm 3D was a fast-paced arcade racer for home consoles and PCs (a subgenre now sadly on its last legs nowadays), the team clearly wanted the fastest, coolest cars they could find, and would eventually single one of them out for being worthy of the cover art.

A week later, I had received a total of twelve submissions from other users. However, it was clear that, before deciding the final finishing order, I had to eliminate any entries that were either aesthetically challenged, not relevant enough, or both. With this in mind, four entries were ruled out of contention on the spot, and would therefore not be featured in SpeedStorm 3D. This left only eight cars under consideration for the cover, although these eight would still be included regardless of what happened next. Three of those, however, would soon be cut for poor aesthetics relative to the other cars - a shame considering their potential.



Close, but no cigar: despite looking promising on paper, the Haapala GT2 and Zacspeed R1 were ultimately held back by fundamental issues that, in hindsight, should have been fixed early on.


Thus, there were now only five cars still being considered for the cover of SpeedStorm 3D. In fifth place was the Haapala GT2 Street Legal; it may have looked racy, but it simply had too much wheelspin to keep up with the field. In fourth place was the Zacspeed R1, with its immensely powerful engine; only some mild understeer held it back from the podium places.



So near, and yet so far: the Greil Dainsleif and LMC Nessus almost took the title, but were both surpassed by something just a little bit more... awesome, for lack of a better word.

The Greil Dainsleif claimed a very honorable third place, with its clean, uncluttered styling and excellent all-around performance. However, the more aggressive-looking LMC Nessus Type S beat it to second place; the fact that the Nessus was even better to drive than the Greil almost sealed the deal. Only a much more powerful car could steal the win from it... and the Adonijin Kite 8000S proved to be just that, and much more. In addition to being much better to drive than anything else in the field, it had much more presence on the road as well. Unsurprisingly, the Kite was chosen for the cover art of SpeedStorm 3D.


The winning car of the inaugural Automation Gamer Challenge - the Adonijin Kite, as featured on the cover of SpeedStorm 3D.

And so the inaugural Automation Gamer Challenge came to an end. But this would just be the start - a second round has recently been announced and is now underway, with results to follow shortly. Whoever wins it will take pride in knowing that they can create a car that not only belongs in a hypothetical video game, but will also feature on its cover as well.

Monday, August 5, 2019

Confessions of an Automationeer, Part 63: Road to Rehab

Confessions of an Automationeer, Part 63: Road to Rehab

Not long ago, I got hold of a car called the Concord LaCampeli by winning it at a virtual car auction. This was a pristine example of a late-80s/early-90s personal luxury coupe, finished in metallic black and powered by a pushrod V8. It sounds like the ingredients for a desirable recipe, but in truth it was quite half-baked, to say the least. So here's how I turned a sow's ear into the proverbial silk purse it should have been.

The most obvious place to start was the engine. Bizarrely, hidden within its cast-iron block and heads was a highly aggressive cam profile and a flat-plane crankshaft - both of which were totally at odds with the Concord's mission statement of being a grand tourer. So I swapped in a milder cam and a conventional crank for more torque in the lower rev range. In addition, I ditched the cast internals in favor of sturdier forged items, leaned out the air/fuel ratio, advanced the ignition timing (for use with premium unleaded gasoline), fitted a second throttle body and swapped out the stock exhaust system for long tubular headers, a high-flow catalytic converter and reverse-flow mufflers. On top of that, I limited quality points to +2 on the valvetrain, allowing me to save costs on other areas by setting the quality there to zero.


The aero balance was all wrong (and a poor fit to boot)...


...the interior was all over the shop...


...the tires were the wrong size and type...


...the gearing and diff setup were awkward...


...the brakes were inadequate...


...the suspension was out of sorts...


...but at least it had adequate safety, plus power steering and anti-lock brakes.






Worst of all, the engine was under-delivering on its true potential.

The rest of the car received similar treatment; after going through it with a fine-tooth comb, I managed to make it better suited to the grand touring role its appearance implied. The gearbox was swapped for a five-speed close-ratio unit mated to a mechanical limited-slip differential, while identically-sized alloy wheels wrapped in high-performance tires were fitted at each corner. To complement them, the brakes were beefed up with larger brake rotors and high-performance pads, and the suspension retuned to provide a sportier drive while retaining a modicum of comfort. To that end, a true premium interior and sound system were installed.





Not only was the retuned engine exceeding all expectations...








...but the rest of the car was also massively improved.

Aesthetically, the Concord remained mostly unchanged, with the exception of different wheel rims (as stated above) in a larger size, and a modest rear spoiler to balance out the effect of the front spoiler the car came with by default. Downforce levels were then tweaked to ensure an appropriate aerodynamic balance between the front and rear ends. Thus, the basic look of the car was preserved in most places, and enhanced in others.


The revised Concord LaCampeli after its makeover. Despite the very subtle exterior changes, it became a much better car under the skin. To say that I was impressed by the mechanical makeover might even be an understatement.

The finished product was much more cohesive and better built than before, which was to be expected. What I did not expect was for the car to be more of a sports car than it once was. After its makeover, it gripped more tenaciously through the corners, and sprinted off the line much more vigorously. It also stopped better, too. In fact, the rebuilt car could now cover all bases with ease; it could finally be used as a grand tourer, daily driver, sports coupe, or muscle car (depending on the situation) simply by combining the best elements of all four of them.

In short, what was once a lame duck had finally become an apex predator of the streets, just as I hoped it would be. I had previously done similar work in the earlier Kee engine build of Automation, but this marks the first time I carried it out on such a severely flawed car using the UE4 4.21 release. And now that the transformation is complete, I feel proud of my work - and remain as eager as ever to make improvements as I see fit on outsourced cars whenever I feel like doing so.

Friday, July 19, 2019

Confessions of an Automationeer, Part 62: Crisis of Confidence

Confessions of an Automationeer, Part 62: Crisis of Confidence

The rule set for CSR 105 - to build a small, economical and affordable commuter car for the European market in 1979(!) - didn't inspire much confidence at first. Having to design late-70s economy cars after three consecutive rounds of making more modern machinery came as quite a shock to me, especially since there had not been a CSR round set in the 70s for a very long time. In particular, the technology available in 1979 was much more primitive compared to what would be available just five years later - in the Automation timeline, multi-point electronic fuel injection and treated steel body panels would not be available until 1982 and 1995, respectively. However, three-way catalytic converters were available by 1979, which proved to be helpful with regards to emissions reduction, especially since the maximum engine emissions were capped at 1800 for this round.

After taking a few minutes to understand the rule set, I set about making some test cars to see which one would be most appropriate for submission. Eventually I settled on the GEC GC1 1.4i, a small hatchback powered by an all-iron, single-overhead-cam, 1.4-litre inline-four with mechanical fuel injection. Underneath, it had a fairly conventional front-wheel-drive layout, with struts up front and a torsion beam at the rear. Standard equipment included a four-speed manual transmission, four-wheel disc brakes, an 8-track player, front fog lights, and power steering. Safety equipment was typical of the era, as was the exterior styling, with a boxy, sharp profile in anticipation of the automotive design trends of the coming decade. However, it was finished in bright green - a typical color for cars made in the 1970s - and this helped it stand out even more.


It's definitely no sports car, but for affordable, economical, and comfortable motoring, the GEC GC1 will easily get the job done.

The little GC1 had two doors on each side and a decent-sized boot - some of the entries had only one (or, worse yet, neither) of these attributes - and that made it quite a practical choice indeed. It was reliable, too, with an all-iron engine and tried and tested underpinnings (struts up front, trailing arms at the rear). What really stood out, however, was its powerband, which had plenty of low-end torque (for the era), and that contributed to its decent economy rating of just 8.6 litres / 100 km. Moreover, with so much torque available in the lower rev range, the GC1 was quite easy to drive even with the four-speed manual transmission, especially with the comfort-biased suspension tune. To prove a point, here are some screenshots showing various aspects of the GC1's tiny engine.




Above, from top: The GC1's 1.4-litre inline four-cylinder engine is fitted with hypereutectic cast-alloy pistons for reduced emissions; a mild cam profile guarantees a smooth idle and improves economy, with more low-end torque to boot; and despite the lean-burn mechanical fuel injection setup, retarded ignition timing makes the 8.1:1 compression ratio possible, thereby improving efficiency further.

By today's standards, however, the GC1 was very slow, taking over 14 seconds to reach 60 mph and totally incapable of reaching 100 mph. Then again, the GC1 was never meant to be a sports car - back in 1979, with the car market having been disrupted by the second oil crisis in less than a decade, outright performance was the last thing on most car buyers' minds. In addition, the brakes proved to be adequate for daily driving, nothing more, while the car's comfort rating of 14.0 (as submitted) is deceptive: 40 years ago, this would have been decent for a small budget hatchback.

In the end, though, the GC1 didn't trouble the top 6, but it still had plenty of merit considering its humble roots. The winning car, the Rhisuki Trekka B-12AT, was a less conservative car by comparison, with a smooth, torquey flat-four which lacked a catalytic converter (an omission made possible by the use of an aluminum block) and was fitted to an automatic transmission for drivability's sake. The low service costs helped compensate for its slightly below-average reliability - another consequence of using an aluminum block.


The winning car, the Trekka, known for its more advanced engineering - a cutting-edge contrast to the GEC's relative conservatism.

And so one of the more entertaining CSR rounds in recent memory came to an end. In the next round, I will show one of my recent Automation projects: to improve a car which was not known for being as good as it looked, but still had potential.

Friday, June 28, 2019

The Challenge of Infinite Space: A New Game Mode Suggestion

The Challenge of Infinite Space: A New Game Mode Suggestion

Even now, four years after its initial release, Infinite Space III: Sea of Stars continues to impress with seemingly endless replay value, more balanced gameplay and some of the best audio and visuals of any sci-fi roguelike on the market today. The campaign mode is the best it's ever been, and the Combat Simulator mode finally allows you to mix and match ships from different factions - and customize them to your liking for good measure. However, as a suggestion, I would propose a new game mode that could make it more compelling - for obvious reasons, I would call this the Challenge Mode.

The premise of Challenge Mode is as follows: you have a selection of preset battle scenarios, and completing the current challenge unlocks the next one. In each challenge, you are assigned a faction and flotilla of up to five ships, each of which has a preset weapon loadout and equipment configuration. You would start out with cheaper, lower-end items, but in later challenges you will get to use the more expensive high-end stuff. And you will most definitely be needing it; your targets will be more numerous and/or more heavily armed as you progress through Challenge Mode. Completing a challenge requires you to destroy some or all hostile ships and/or protect a vital allied ship or space station from enemy units. While I'm at it, I might add a separate tutorial for Challenge Mode to help you understand how it would work.

I'd suggest 15 to 20 challenges for this mode, to strike a balance between quick completion and a deep gameplay experience. Also, when you complete a challenge, you would earn a gold, silver or bronze medal depending on how many points you scored, with gold requiring more points than silver, which in turn requires more points than bronze. Fittingly, this mode would deserve several unique Steam achievements, most likely four of them: one for completing the first challenge, another for getting your first gold medal, still another for completing every challenge, and one final achievement for earning every gold medal the Challenge Mode has to offer. But how would this mode be introduced? Making it a paid DLC item might not be required (or even desirable), because with the base game, you already get plenty of bang for your buck, and forcing customers to pay extra for this mode weakens the game's value equation. It would thus be best to patch Challenge mode into a future update for the game for free, as has been the case for any and all content added to Sea of Stars throughout its entire history.

In short, Challenge Mode, as I have explained above, would be a worthwhile addition to the game. Not only would it appeal to those who have already fully completed the campaign on the highest difficulty, it would also allow beginners to learn the basics of combat without having to jump into the campaign. Moreover, you get the chance to improve your skills by making the most of various preset loadouts. Because as you may or may not know, there is more to Sea of Stars than attempting to score 250,000 points during the campaign on the highest possible difficulty.

Wednesday, June 26, 2019

Doll Maker's Diary, Part 25: Cover Girl Duets

Doll Maker's Diary, Part 25: Cover Girl Duets

So far, many of the dress-up games I have tried have some sort of fantasy theme. However, there are quite a few of these games which are focused firmly on modern fashions. The Cover Girl Dress Up Game is among them. Uniquely, it allows you to create outfits for exactly at once: an elegant one on the left and a more casual one on the right. Here are two examples.



Above: Two examples of sketches made in the Cover Girl Dress Up Game. In this particular game, the doll on the left always has a more mature and elegant look, in contrast to the carefree, relaxed style of the second doll, and the list of items available for them differs accordingly.

As expected, the items available for the first doll tend to be more conservative and formal, while those for the second doll are more whimsical and flamboyant by comparison. But as always, with either doll, the possibilities for outfits are virtually endless. And there is very little for me to complain about, although I would suggest more color choices for the items, additional background patterns (a horizontal gradient is the only one available) and the ability to swap the dolls' positions around.

When you compare the two item sets available to your, it soon becomes apparent that the one for the doll on the left lends itself well to a mature, tomboyish look, and the other item set (for the doll on the right) exudes a more youthful and feminine flair. Best of all, however, the game allows you to do both at once, as shown below.


Thus ends my summary of the Cover Girl Dress Up Game. Stay tuned for the next entry in this series.

Tuesday, June 11, 2019

Doll Maker's Diary, Part 24: Fairy Tale Scene Maker and Other Doll Game Discoveries

Doll Maker's Diary, Part 24: Fairy Tale Scene Maker and Other Doll Game Discoveries

Recently, I have been trying out another one of the various Azalea's Dolls Flash games on the Internet - specifically, the Fairy Tale Scene Maker. It is quite similar to the Goddess Scene Maker, but instead of a Greco-Roman theme, it is heavily inspired by Grimm's Fairy Tales and adaptations thereof. Here are a few examples of artworks I created using this game.






 Above, from top: Examples of artworks made using the Fairy Tale Scene Maker.

You can have up to eight characters (which can be either male or female) in a scene at any one time. As usual, the first few menus are reserved for the character's basic appearance (face, skin tone, hair style and color, etc.); the next few ones after that are about the color and type of the clothes they will wear - underwear, tops, skirts, pants, shoes and so on. From here you can add accessories, from jewelry and hand mirrors to books and even weapons, among other things. You also have three backgrounds to choose from: a village, a path leading to a castle, and a dense forest.

In addition, I stumbled upon a few discoveries when trying other games on the site:
  • You do not have to make every character that you created in a Goddess game artwork be (or look like) an ordinary human being - you have the option to give them mermaids' tails or angels' wings. Moreover, you can add babies to your artworks - cute enough on its own, but heartwarming when you consider the fact that some characters in Greco-Roman mythology actually were descended from gods. And you can customize them as well - although your options for those are much more limited compared to the ones available for fully grown human(oid)s.
  • The Four Elements game begins with a quiz containing 10 questions, each of which has four possible answers; once every question has been answered, the game will select a theme based on your responses. Further details on this process (and the game to which it belongs) will be shown in a future post in this series.
  • The Lord Of The Rings Dress Up Game is actually split up into three different games: one for creating scenes with nothing but Hobbits, another devoted exclusively to dwarves, and yet another for creating scenes with other types of characters (humans, elves, etc). However, all of them share many customization options with the Tudors and Game of Thrones Dress Up Games.
This concludes my summary of my recent discoveries on the Azalea's Dolls website; stay tuned for further updates.