Tuesday, February 13, 2018

Doll Maker's Diary, Part 5: Valentine's Day Special

Doll Maker's Diary, Part 5: Valentine's Day Special

Today is Valentine's Day, and to celebrate, I have made one artwork each of my four Doll Maker characters (Tiffany, Katherine, Jessica and Michelle, in that order) in red dresses, and holding red flowers. So, without further ado, here they are.


The first card is actually a recolor of an earlier one I made. Originally, the dress and background were both black, while the rose in Tiff's hand was white. All three are now bright red, and to fit the Valentine's Day theme, I gave her red jewels as well.


The second card is similar to one which will be shown in an upcoming post, except that Katherine has been given a red flower, necklace and bangle, and her long dress is now bright scarlet.


In keeping with red being Jessica's color of choice, this design is quite logical. In fact, it will be shown on an upcoming post in which I give her a brief description.


Finally, here is Michelle, now wearing a darker shade of red. I also redesigned her slightly by giving her a different updo and a rounder face due to my mild dissatisfaction with her original design. The new one is more obviously inspired by supermodel Jourdan Dunn, but still adds some welcome racial diversity to my Doll Maker characters.

That just about does it for this special post, but there will be more cards planned featuring these four characters, so stay tuned.

Monday, February 12, 2018

Confessions of an Automationeer, Part 32: Building for the Bargain Basement

Confessions of an Automationeer, Part 32: Building for the Bargain Basement

Even though my favorite cars to build in Automation are often performance cars, especially supercars and hypercars, they are by no means the only types of vehicles that can be built in the game's car designer. In fact, the vast majority of forum challenges tend to feature much more affordable mass-market machinery. CSR63 is a case in point, since the entrants for that particular round of CSR were tasked with building an early-00s entry-level commuter car for developing markets costing no more than $8000 after the addition of a 10% markup. Thus, the pre-markup price could be no higher than $7200. With such a tight budget, it was nigh-on impossible to design, build and submit a car built to Western standards, and so many sacrifices would have to be made for the sake of eligibility.

My entry, the LAP LQ1, was built with a low asking price in mind - $7700 to be exact. Despite only having a simple single-point injection system for its engine and a four-speed gearbox, it had a fully rustproofed bodyshell and chassis, something that several other entrants' cars lacked. Even at such a low price, this tiny subcompact also came with a basic stereo. Without it, it would have been a rolling torture chamber. And while it did not have rear disc brakes or driving aids, few would expect such a cheap car to have any of these items, even though they would be useful at times.


Cheap yet surprisingly cheerful inside and out - the LQ1 in a nutshell. Or is it?

Despite the (en)forced cost-cutting measures I took, the LQ1 made it easily to the second round of judging, where the remaining contenders would be test-driven. The resulting review of the LQ1 was quite favorable; in fact, the only reason why it wasn't a finalist was the fact that ABS was merely optional instead of standard, and was omitted on the test example to save costs. Other than that, it was merely an average performer, with nothing that stood out in the buyer's view.

This round reminded me of CSR32, which also required entrants to build an entry-level car, but used the Kee engine and was set a whole decade later. Due primarily to the very tight budget for the era ($11000 including a 20% markup), I felt that I could not build an eligible car back then, and so decided to skip that round. Recently, however, I attempted to build a car that conformed to the very strict rules for that round. What I ended up with was a car that was indeed eligible, but only just, and even then, it wouldn't have been very competitive in most respects. In particular, getting the car to return >47 US mpg (the required minimum value) would have been a struggle, even with direct injection, and when all was said and done, it barely exceeded that threshold.

Another Kee-era round with a similar premise was CSR54, in which the trim year for entries had to be set to 1985. This time, I actually submitted an entry, and despite only having average fuel economy, it did reasonably well, although in most respects (except for its surprisingly good performance) it did not offer much of an advantage over its rivals. However, given that I already made a recap of that round, I will not describe it further in this post.

In short, designing a budget car in Automation is challenging, but it will also be enjoyable - if you are prepared to cut costs and make sensible choices in the design and engineering phase. However, the extra possibilities in the UE4 version have made the idea of developing such cheap and (hopefully) cheerful machinery much more attractive than it once was. For the next post in this series, I'll elaborate on how CSR became a giant free-for-all. Stay tuned!

Friday, January 26, 2018

Confessions of an Automationeer, Part 31: The Kee to Success

Confessions of an Automationeer, Part 31: The Kee to Success


When I was given my first chance to host CSR in over a year, I immediately jumped at the chance. However, having seen how the previous round failed to utilize the full potential of UE4, I realized that I had to find a way to avoid this problem, and the only way to accomplish this was to revert to the original Kee version of Automation until UE4 was fully sorted. Being the enthusiast that I am, I themed CSR61 around sports coupes on a moderate budget ($25000 with a 20% markup) for the 1999 model year. I could have made CSR61 about economical compacts for the 2009 model year, but chose not to do so, the reason for which will be discussed at the end of this post.

Within a day, I started receiving entries from other users. Given that the reviews for CSR26 were very long, I decided to make them much more concise this time around, but as was the case back then, I made a draft of the reviews as soon as I had received the corresponding entries. And as before, the plan worked. This time, I only received 25 entries, but this was still a big undertaking. Inevitably, the reviews provided quite a few surprises... and a few things that weren't so surprising.

The first thing I did was to narrow down the field to a few contenders. If it didn't handle well enough, was too difficult to drive, had insufficient power, or quite simply lacked the looks, it was out on the spot. That left me with just nine cars to choose from - but for some strange reason, five of them were totally identical to each other (and also five of the cars I had cut previously) under the skin, so from that lot, I was forced to cut all of them except for the best-looking one, which, like the other four finalists, remained in contention purely on merit.

Then came the time to test-drive the last few remaining cars: the Orion XS-1, Centauri Buffalo GTZ, JHW Huntsman, Dragotec Vienna and GBF La Astuzia. After this second round of research, the Huntsman was cut for being too tame, and the XS-1 was the next to go, due to not feeling enough like a premium product despite its impressive technical specification. Separating the top three was much more difficult, though.

The futuristic La Astuzia took the bronze medal. It looked, felt, sounded and drove like a true thoroughbred, but its complex suspension was much more maintenance-intensive than I wanted, and so it could not finish any higher. The Vienna also looked and felt like a potential winner, and was without doubt the best all-rounder of the top three, with astounding performance stats across the board. What held its back were its merely average build quality and reliability. This, combined with its relative lack of drama, ensured that it would finish a close second, behind the V8-powered Buffalo. That car was not only more reliable, but better built as well.


The Centauri Buffalo GTZ - bold, brutish and brilliant on the road.

After awarding the win to the big blue Buffalo, I pondered on what to do with the clone cars. It took me around an hour of deliberation, but I settled on a brutal car chase along Highway 1 from Santa Monica to Malibu, with all 10 clone cars chasing the Buffalo. Five of the "clones" were destroyed in a crash just before the tunnel, and the rest were wiped out on the westward run to the junction at Sunset Boulevard. To be fair, the epilogue was not entirely necessary, but I added it anyway just because I hadn't done so before.

Given that CSR62 recently reintroduced UE4 Automation to CSR after that version received several major updates, it is possible that CSR61 could be among the last few rounds to use the original Kee version. Still, I'll look back on this round as a fairly pleasant experience for all involved. I will give a rundown on CSR62 after it has concluded. In the meantime, I'll see you back in the brave new world of UE4 - but I will still revisit Kee when I have to.

Tuesday, January 9, 2018

Confessions of an Automationeer, Part 30: Unreal Problems

Confessions of an Automationeer, Part 30: Unreal Problems

CSR60 marked a milestone for the long-running competition, for it was the first one to use the UE4 version after 59 straight rounds in the original Kee version. It seemed like a good idea at the time, but... there were teething troubles, more on which later. In the meantime, here's the premise for this ground-breaking round.

Rather than take the safe route by making a round about affordable stuff like economy or family cars, the host requested the entrants to build and submit premium sporting convertibles from the years 2018 to 2020. Given that performance cars were my forte, entering this round was a no-brainer. I opted for a fairly simple approach - a big normally aspirated engine up front, driving the rear wheels via a six-speed manual gearbox, all wrapped up in a two-seat body. The resulting car, the LAP LE52, was submitted using the exact same method as used in Kee - by attaching its associated export file to a PM for the host. We assumed there would be nothing wrong with this feature, as had always been the case previously...



Unfortunately, the import function for UE4 Automation was bugged to the point of uselessness, so the host requested an alternate method: sending a zip file containing screenshots from the trim (design, overview, wheels/tires, brakes, safety and suspension) and engine (one showing an overview of the engine variant, and one showing its dyno sheet) tabs, with exactly one additional screenshot from the photo mode included. I duly obliged, but was miffed about being used as a guinea pig for a new, unproven take on such an established competition. In fact, this round is not likely to be remembered as fondly as it should have been for that glaring issue alone. And no matter what the results are, I won't be as satisfied as I would usually be after wrapping up a round of CSR.

One major consequence of this botched round is that until the UE4 version has been properly sorted, CSR is highly likely to revert to Kee for the time being, starting with the next round. I have mixed feelings about this. While the previous round used the Kee engine, its obtuse scoring and pricing systems put many users off, me included. So returning to a more conventional scoring method made perfect sense. On the other hand, I was giddy with anticipation after finding out that this round would be a leap of faith into the unknown world that was UE4 Automation, and only now, just before the deadline, have I realized that it is still very much half-baked in comparison to Kee; thankfully, the host has also realized his mistake, and is unlikely to repeat it again. Here's hoping that CSR61 takes place as normal, in the Kee engine, without anything as farcical as what happened this round, or the previous one for that matter.

Doll Maker's Diary, Part 4: Back In The Black

Doll Maker's Diary, Part 4: Back In The Black


Watching this year's Golden Globe Awards, where nearly everyone wore black, gave me an idea: What if all four of the characters I have made so far (or plan to) actually attended the ceremony? To that end, I gave each of them a black gown, but they would be paying tribute to victims of sexual abuse, rather than someone who died recently, as is customary in Western cultures. Here is how each of them would look.



First up is Tiffany Ellis, my first doll. Her dress is a recolored version of one I made for her earlier, teamed with emerald jewelry - a homage to the suffragettes who campaigned for women's rights a century ago, and often wore green.


Next is Michelle Hawkins. I gave her chunkier earrings and a diamond necklace, along with a dress which has a more voluminous silhouette and a slightly different neckline.


The next character is Katherine Meyer. Her dress is shorter and slimmer, and is in fact the simplest design here. You should expect to see much more of her in the near future.


Finally, the fourth and last character here, Jessica Burton, has the longest dress of all, and wears red statement jewelry - a logical decision given that red is her favorite color. Like Katherine, she will be making more appearances on this blog in the coming posts.

That just about does it for now, but in subsequent posts, expect to see other outfits for these characters (especially the last two). In the meantime, I'll reflect on yet another CSR round that didn't end well - stay tuned for details.

Saturday, January 6, 2018

Doll Maker's Diary, Part 3: Sweet Sunshine

Doll Maker's Diary, Part 3: Sweet Sunshine

After creating Tiffany, my first Azalea's Dolls character, I realized that I wanted to create another one. Having already made purple the color of choice for my first "doll", I turned my attention to the opposite side of the color wheel - yellow, to be precise. This second character, whom I shall refer to by the name Michelle Lee Hawkins, is Tiffany's close friend.  


Above: A card for my second doll, Michelle Lee Hawke - Tiffany's best friend. Here is how she would look in a bright yellow dress.

I gave Michelle dark skin and a warm complexion, as a counterpoint to Tiffany's cool, pale skin tone, and set it off with yellow garments such as the strapless dress shown above. To complete the look, I added gold jewelry, as though to make it look like she is radiating endless sunshine all around her. In addition, she would most likely have a sanguine temperament - extroverted and outgoing, in contrast with Tiffany's melancholic temperament, which is more introverted and conservative.

Beyond these first two dolls, I have two more in the pipeline. Stay tuned - these two are meant to complete the four-temperament ensemble I have been planning for a while.

Tuesday, January 2, 2018

Confessions of an Automationeer, Part 29: New Year's Resolutions... And Revolutions

Confessions of an Automationeer, Part 29: New Year's Resolutions


Happy New Year to all the Automationeers out there! This post is where I will summarize some of my new year's resolutions as a Steam user. 

First and foremost, my aim is to be a better Automationeer overall. Given that I was running out of ideas in the UE4 version, I realized that the only way to do this was to opt into the recently released open beta for the latest UE4 build. I've only been using it for two weeks, but already this one is well on track to being kept: the addition of hints and warnings is proving useful whenever I design a new car. And in response to criticism from other users in the past, I have been making concerted efforts to improve the exterior design for each of my cars.

Another part of my new year's resolution is to revise the lore for my first all-UE4 Automation car company, Morton. Since the recent UE4 update renders all previous designs non-canon, it serves as the perfect opportunity to redesign every model they have made, along with all their engines. So far, this plan is off to a decent start. For example, the Morton Kestrel, the flagship sports car of the range, has not only been redesigned with a more aggressive front end, but according to the new lore, is also introduced two years sooner compared to previously. Moreover, its engine will be shared with other Mortons, as was the case in the previous timeline.

Finally, I will also commit to more all-UE4 competitions, or, for recurring competitions such as CSR, enter more rounds which require the use of UE4. With increasing amounts of realism being built in to this release, it is no wonder that participating in these challenges ought to be a much better experience than it once was, especially as more and more of the bugs are fixed over time. That said, UE4 in its current state is still a long way from being polished (and missing scenarios and a Lite Campaign - I can't wait to try those after they've been reintroduced). On the other hand, the earlier Kee version is a long way from being replaced altogether by UE4, especially since other challenges use it out of necessity.

In short, the recent changes to UE4 are so comprehensive, and the extensive rewrite of Morton's backstory resulting from them, effectively ensure that my new year's resolution is effectively a revolution rather than evolution. So sit tight and buckle up - 2018 is going to be an exciting year for sure.