Monday, March 20, 2017

Laserforce Explained, Part 2c: DM and CTF

Laserforce Explained, Part 2c: DM and CTF

Most of the game types available at Laserforce are either too simple or unusual for tournament or league play under normal circumstances. To that end, they offer a few special game modes that cater to the needs of tournament organizers and players who want something more rewarding and challenging than the usual game modes. As such, due to their greater difficulty, they are seldom used outside of official tournaments. So, to begin this discussion of game types commonly used in league play, here are two more Laserforce game modes I will describe in this informal guide.

DM (short for Death Match) can be played as an individual or team game. Each player starts a DM game with 100 hit points and a shotgun which serves as the mode's default weapon. Being hit by enemy fire will not only make the lights on your battle suit grow dimmer, but also cause damage, and will lead to you being deactivated (i.e. unable to fire) for 10 seconds (as well as losing any items you had in your inventory) if you run out of hit points, although your health will gradually regenerate when you are not shooting. All players will receive one frag for every opponent deactivated. However, zapping an ally will cause you to receive damage (or even be deactivated if you're particularly careless), and zapping a deactivated player (which can be done up to a few times) will not earn a frag, but will merely cause them to remain deactivated for the next few seconds. In addition, items can be obtained by hitting a stationary target twice; once this occurs, items cannot be collected from that target for the next 20 seconds. Moreover, players cannot have more than 250 health, 100 armor and 1 rune at a time, the last of which I shall describe shortly.

Items in DM fall into four categories: weapon upgrades, defensive items, power-ups and runes. Weapon upgrades activate an alternate fire mode for your blaster, but only provide a limited amount of shots. There are two such items available: the Nailgun and Rocket Launcher. The former allows you to fire up to 30 fully automatic shots by holding down the trigger, and in addition to this, it will increase the fire rate and damage per shot. The latter gives you 10 rockets, each of which has a large blast radius; anyone caught in the "explosion" will receive half as much damage as they would from a direct rocket hit. In the right hands, these upgrades can turn the tide of a battle.

DM also includes a pair of defensive items, both of which are intended to help a player resist incoming fire more easily. Armor absorbs opponents' shots, and its strength decreases with each successful hit; once the armor is depleted, only then will you actually take damage. Super Health gives 100 health points to whoever collected it, although if they end up with >100 health as a result of this, it will gradually decrease back to their starting level. Use them wisely and you should be able to survive for longer than you would otherwise.

From DM Level 2 onwards, power-ups become available for use. The Ring of Invisibility turns off the lights on your battle suit for one minute, making you more difficult for your prospective attackers or victims to detect. Quad Damage quadruples the amount of damage you can deliver for  30 seconds; it stacks with the Strength rune, thereby octupling a player's damage output if he/she has both of these active at once. Invulnerability prevents you from receiving any damage at all for 20 seconds. Utilize the benefits they confer and you will, more often than not, become virtually unstoppable.

Runes are only available in DM3 or above and affect you indefinitely until you are fragged. There are four distinct runes, but only one of each exists in the arena, and you can only carry one rune at a time. As an incentive to use runes, fragging an opponent who currently has a rune will cause you to collect the rune he/she had. So here they are, in no particular order.

Regeneration is a potential lifesaver in tight situations, since whoever collects it will recover their health (and armor, if they have any) more quickly than usual. Haste greatly increases the fire rate of your current weapon, regardless of what it is. Strength doubles your damage output, but can be stacked with Quad Damage for an eightfold increase. Finally, Resistance halves the damage you would receive from enemy fire.

Capture the Flag (often abbreviated to CTF) is a variant of Team DM in which each team has a flag which other teams aim to capture, while simultaneously defending their own flag. The flag is assigned to a randomly selected stationary target; hence, the more targets there are in the arena, the more teams this mode can support. Capturing a flag owned by an opposing team involves zapping it three times, then avoiding being fragged en route to your team's flag before zapping it three times. Fragging an opponent who is carrying your team's flag will cause it to immediately return to your base. Please note that you can only capture an opposing flag if your team's flag is in your base. Finally, you can only use your flag to collect items if it is not currently being carried by an opponent.

DM and Capture The Flag are available in four distinct skill levels. The higher the level, the more items will be offered. As stated previously, power-ups are introduced at level 2 and runes added in level 3. Level 4 is identical to level 3 except for all players starting at the same skill level, equivalent to standard level 6.

In short, these modes are more challenging than most other game types, and as such are recommended for highly experienced veterans like myself. In the next post I will describe a staple game mode of Laserforce leagues worldwide: Space Marines.

Tuesday, March 14, 2017

Laserforce Explained, Part 2b: More Game Modes

Laserforce Explained, Part 2b: More Game Modes

In the previous post I described some of the game types currently on offer at any Laserforce site in the world. This time, I will explain a few more game modes, including a few that I haven't tried as of now. Unlike last time, though, I will focus on the more challenging modes offered, whereas the game types previously mentioned were generally straightforward. So here is the rest of the list of available game modes, complete with a few tips to help you survive them.

Fugitive mode splits the players into two teams: fugitives (yellow) and marshals (blue). The former tend to consist of a small number of more experienced players and always enter the playing field before the game commences, allowing them to take up a strategic position. Marshals, on the other hand, do not enter the field until the game has actually started and are never allowed to actively chase fugitives; instead they tend to hide in some secluded corner of the map, hoping to ambush them. Players' initial allocation of lives are determined using a complex algorithm that takes all of their skill levels into account. As such, if there are many more marshals than fugitives, the former will start out with far fewer lives. At any rate, taking too long to find an opponent will cause a player to be warned, and they will even lose a life if enough time passes without a successful hit on an opponent. If a player runs out of lives, he/she will be eliminated from the current game, although to discourage this, they will be warned if they only have a few lives left.

Photon Emulation evokes the feel of Photon, the world's first laser tag system, and as such is the slowest-paced game mode of all. Players can only fire once per second and cannot use missiles. However, regardless of skill level, only one direct hit is required to stun an opponent, although this can only happen if the victim was not already stunned. In addition, players cannot zap the same opponent more than three times in a row, and must hit another opponent or a fixed target to reset this counter. Also, a player who is hit by enemy fire will not be registered as stunned for a half-second after impact, and will be reactivated within five seconds. Finally, due to the lack of Warbots (or equivalents thereof) in Photon, these props are not used in Photon Emulation.

Wedlock requires an even number of players, and for good reason: all players are split into pairs and initially act as a single entity. Thus, whatever happens to either player in the pair, be it receiving a special ability or being deactivated, affects both, until the pair holds down their triggers at the exact same time while active after accumulating at least 25 special points in total. Once the players are decoupled, none of the negative effects of the wedlock will affect them, although the positive effects will be retained.

Dead Aim (which can be played as an individual or team-based mode) emphasizes accuracy above all, since each player is initially allocated a limited number of shots and cannot carry more shots than a predetermined value - both of which depend on the player's skill level, with higher-ranked players having smaller initial and maximum ammo loads. Obviously, it is impossible for a player to open fire if all of their shots are expended; however, any direct hit on an opponent will replenish their ammo reserves, with high-level players needing more hits to do so than low-level players. Also, the higher a player's skill level, the more direct hits they will need to destroy a fixed target. Finally, activating a payback (which immediately reactivates a player who is deactivated) requires two shots; in addition to this, firing a missile requires four shots, and if it hits an opponent, the attacker will gain additional shots (enough to recoup the initial four-shot investment multiple times) plus lots of points.

Tag is an individual game type in which some of the players will be "it", and aim to tag a player who is not "it" using a missile. Those players can score points by zapping tagged players without being tagged themselves (although they cannot zap any player who is not tagged), Players who are tagged cannot score and can only fire missiles instead of normal shots; however, they can tag an opponent by firing a missile at them, and will revert to normal whenever this occurs. As an incentive to be "it" for as little time as possible, a tagged player will not only be unable to destroy static targets, but also lose points whenever they are hit, and will always revert to normal if they stay "it" for too long, losing even more points in the process while an untagged player is tagged automatically at random. Anyone who tags an opponent cannot be tagged until the attacker zaps a tagged player or stationary target, or the victim tags any other untagged player. Finally, warbots and skill levels are not used in this mode.

That brings an end to my discussion of normal Laserforce game types, but there are a few modes that are primarily reserved for tournaments and official league play. These will be described in detail in the next post.

Sunday, March 12, 2017

Laserforce Explained, Part 2a: Game Modes

Laserforce Explained, Part 2a: Game Modes

At its core, Laserforce is a live-action game in which players compete for the highest score in each session, either for themselves or for their team. A multitude of game modes are offered, and each one has its own unique set of objectives. Shooting at an opponent with your blaster between one and three times (the exact number being dependent on your skill level) will earn you points. In some of these modes, players will be eliminated if they are either hit enough times or receive a direct hit from a special weapon. However, they all have one thing in common: the first player (or team) to fulfill the victory condition(s) will always win. To be honest, though, most of the modes apart from the standard individual and team-based deathmatches are seldom used outside of Party Nights and other special offers, but it's nice to know that they are still on offer as of now.

Individual and Team games are the simplest of all. In the former, whoever scores the most points before the timer runs out will win. Also, in a team game, the winning team is the one which scores the most points, but it may not necessarily have the highest-scoring individual player. The latter mode supports up to seven teams, and goes by the name of Partners if more than two teams are present. Additional points can be scored by hitting a glowing target three consecutive times, although this can happen only once per player (and in team games, only on targets not of the same color as that player's team). Moreover, once per game, players can control a mechanical prop called a Warbot by shooting at it several times with their blaster; whenever this occurs, the Warbot will score points on their behalf for the next minute. Finally, at higher skill levels, players can hit their own teammates, and in addition to being stunned (i.e. unable to fire) will lose some points in the process. There is even a Masters version of the Individual game type, intended mainly for tournaments, in which all players are at the same skill level (standard level 6), but Warbots and Invulnerability (details of which will be shown in an upcoming post) are not used.

Uber (referred to as "Supercharge" on the official site) versions of both individual and team game modes are available. The main difference is that the pace of the game is much faster than it normally is - for example, players are stunned for half as long as they normally would when they are hit -  while an Uber Team game is limited to exactly two teams (red and blue instead of the usual red and green). Moreover, each special ability costs the same number of points regardless of how often it was previously used, whereas in other modes, it usually becomes more difficult to obtain after each use (and even then, they can only be used against players whose level is at least equal to that of whoever activated them).

Shadows mode (again, available as an individual or team-based game type) is different from the other modes on offer in that it emphasizes stealth and strategy. In this mode, players' equipment will only be fully lit if they are being targeted using a missile or whenever they are attacking a fixed target. All players can switch from "shot mode" (in which they can fire normal shots or high-powered missiles, and their equipment is dimly lit) to "missile mode" (which only allows for the use of faster-firing missiles, and causes a player's equipment to go dark) or vice versa at will during the game. In addition, it always takes a single direct hit for a player to be stunned, and a missile will stun the victim for longer than a normal shot would. There is even an Extreme version of this mode, in which all players are in missile mode for the whole game; as such, it's even more challenging than the regular Shadows mode. In fact, every Shadows game I have played so far was of the Extreme variation, which is unsurprising considering its greater popularity.

Gladiator and Highlander are even more challenging in that, unlike most other modes, it is possible for a player (or a team) to be eliminated from the game while it is still in progress, and as such, the game will end immediately if all but one player or team is eliminated before the time limit is reached. This occurs when all lives have been expended through being hit by enemy fire (in Gladiator) or when they are hit by a missile (in Highlander). The main difference between these modes is in the rule set: although Warbots are not used in either of these modes, Gladiator forgoes special abilities altogether, and in that mode, players start with between 15 and 30 lives depending on their current skill level (the higher the level, the fewer lives they will start with) and gain lives by zapping opponents and static targets. On the other hand, Highlander starts out slowly, but becomes faster-paced over time, making it feel even more intense in the last few minutes; moreover, eliminating another player with a missile will cause the attacking player to collect the full score and special points that their victim had accumulated prior to elimination. Finally, activating a shield in a Highlander game will provide protection from incoming missiles until either 10 seconds have elapsed or the player using it is reactivated, although the cost for triggering this ability increases from 5 special points to 30 special points over the course of a mission. While I have never played any Gladiator matches yet, I have been quite successful in Highlander, scoring lots of points before either being eliminated or running out of time.

Timewarp mostly follows normal rules (minus the Warbots) with the exception that each player has a fuse attached to them, and higher-level players not only start out with shorter fuses, but can't extend them as much as lower-level players. However, regardless of rank, any player whose fuse runs out completely will be eliminated. To delay (or even avoid) this untimely end, players can rewind their fuse at the rate of 1 second per special point by holding down the trigger while they are active; however, if a player does this while they are deactivated, they will pause their timer (using up 1 special point every 2 seconds) until they either expend all their special points or are reactivated. In addition, a player can fast-forward an opponent's timer by obtaining the equivalent of a missile lock on them, subtracting 4 seconds from the victim for every second the missile lock lasts until it is broken or the victim runs out of time. Finally, if a player has more than 15 special points, holding down the trigger while up will cause a time-warp, for each second of which their timer is rewound by 2 seconds, whereas their opponents' timers are fast-forwarded by 1 second, until the player who activated it either uses up all their special points or is deactivated.

In addition to these game modes, many others are offered, but I have already described enough of them to realize that this post should be split into two parts. The remaining modes will be described in the next post.

Tuesday, March 7, 2017

Laserforce Explained: A Guide to the World's Most Successful Laser Tag Chain, Part 1

Laserforce Explained: A Guide to the World's Most Successful Laser Tag Chain, Part 1

During my two-year tenure as a student at the University of Queensland, I discovered a new way to have fun on weekends and holidays, when academic progress was the least of my worries. Having mastered a lot of arcade games in the space of just a few months, I set out to find something even more challenging. Fortunately, I didn't have to look far for the answer - and it turned out to be right under my nose. Laserforce, the world's most successful laser tag chain, was headquartered in Brisbane, so naturally, I decided to take the plunge and play a few games - first at Strike Wintergarden (which was closest to the apartment I had rented), and later at their headquarters in Woolloongabba, as well as in Sky Zone MacGregor (there are even more sites scattered throughout the city, such as the one in the AMF Bowling arena across the street from Sky Zone, but I did not visit them due to lack of awareness). And to be honest, it was like nothing else I had tried before.

So what exactly is Laserforce? Well, at first glance it appears to be just another laser tag chain. However, it's actually much more than that. It was established in 1988, not long after the debut of the very first laser tag chain, which was called Photon. However, thanks to the perseverance of its founders, Alan and Len Kelly, Laserforce has survived and thrived for nearly three decades, and developed seven distinct generations of proprietary equipment, each one incorporating more advanced technologies and features than the last.

Most, if not all, of the hundreds of Laserforce sites around the world are well-appointed, with a full set of amenities for guests (up to 60 or more in some sites and very friendly (not to mention helpful) staff. In fact, they are not really stand-alone facilities. You will find a video game arcade, bowling alley, or trampoline park (or any combination of the three), but that's for another post. As for the Laserforce arena itself, pricing and special offers tend to vary from site to site.

Taking the Woolloongabba site as an example, permanent memberships cost A$7.00 (or A$6.00 for under-16s), while the price of individual entry for sessions ranges from A$12.00 for a single game to A$67.00 for 10 games - although considering the fast-paced nature of Laserforce causes players to burn plenty of calories in each game, it seems like money well spent. However, the best deal I have found so far was actually at Strike Wintergarden, where every Thursday (although it used to be a Wednesday deal), anyone can just walk in and play as many laser tag games as they want (or need) for just A$10. Some sites, such as Sky Zone Macgregor, also allow players to enter for 10 minutes at a time in a continuous session lasting for several hours.

And having briefly described the history, locations and pricing for the world's greatest laser tag company, I shall move on to the various game types offered and how to play them... but that will require a post of its own to explain fully.

Thursday, February 16, 2017

Confessions of an Automationeer, Part 7: CSR33 Results

Confessions of an Automationeer, Part 7: CSR33 Results


So far, CSR33 has been an absolute roller-coaster ride, not just for me, but for all of the 43 users who submitted a car in this round. And having explained my entry in detail, I will now recap the results of this latest round. There were a few surprises in the first round of eliminations, but on the other hand, there were also plenty of obvious choices to consider for the next round of cuts. Here, I will begin by discussing the many reasons for not making the first cut, before moving on to the subsequent stages of elimination.

When the host for CSR33 announced that this round would involve building entry-level executive cars with a touch of elegance and comfort, he really meant it. As such, cars that did not even look right overall would be immediately rejected. Considering that junior executive cars have to be larger than small C-segment cars and smaller than mid-range luxury cars, anything that was too small or large would definitely not make the cut either. Cars that primarily suffered from either or both of these aesthetic drawbacks included the Cordia Aspero, Petoskey Keeweenaw, Minerva Midnight, Evgenis Typhon, JHW Aeterna, LHE Astonish, DSD Chrome, FOA Senate and Gnoo Cityscape. One other car did not have its user name attached to its zip file, but this did not matter one bit; it was just too anonymously styled to be considered. In fact, quite a lot of cars that were submitted simply did not have the sort of styling required to make the right impression in the executive car market, with the Pragata Kana also among the worst offenders.

Even a good-looking car would be of no use if its engineering was either half-baked or excessively complicated, though, and this sadly proved to be the downfall of some of the other competitors. The Boony Continental was the worst offender: with a separate chassis, solid rear axle and anemic 1.2-liter triple, its third-world image and mechanicals was totally at odds with the target market. On the other hand, the Versal Delante, with its semi-active sway bars, was immediately disqualified for supposedly exceeding the trim engineering time limits, and would have been discarded anyway for excessive fuel consumption. And the Shromet Toldedo was just too big, heavy and old-fashioned, with insufficient power to boot. Another car, called simply the Argon, was also overweight, and in addition to being aesthetically challenged, suffered from unacceptably high fuel consumption. Surprisingly, the Beta Osmosis and BAM Bavaria 628, among a few other cars, also failed to make the cut for using semi-active sway bars and adaptive dampers (a rare combination in 1998, and one not used at all in contemporary junior executive cars), although for various reasons besides this, none of them would have won anyway

And just to ram the point home, anything with too little standard equipment would be unlikely to make the first cut. My entry, the Kramer K3 2.5, was guilty of this, but then again, so were quite a few other cars, such as the Galt Vice, Bogliq Kitten Ralleye, Hodan 445 and Valiant RZA. In short, anything that felt too downmarket to look at and/or drive would simply cut no ice with the hypothetical customer in this scenario. Could it get any more difficult for the entrants?

As it turned out, it did. Insufficient performance and/or economy was a definite reason for rejecting a particular vehicle, and once again, this led to some obvious cuts (and a few less obvious ones). The Caravel, Maesima NV-997, Scarab Nova, DMV Downdraft and Penistone Seventy-Five all failed to meet benchmarks in either category, and each one (except for the Maesima) had ridiculous company or trim names to boot. And yet, among the many failed attempts to produce a legitimate contender, there were still 10 cars that made the first cut. All that remained was to rank them, from worst to first...

The GSI Paradigm was the first of the top ten cars to be axed; its styling was decent enough in isolation, but too bland for most executives. Meanwhile, the Sei Executive, Erin Tauga, and Smooth Jabardo were all rejected for being too advanced (and hence time-consuming and difficult to engineer in real life), while the Griffa Sirion turned out to be too expensive. Next to fall were the thoroughly average Rennen Angeles and CM Regina, leaving just the podium finishers. The Iurlaro Caterina, despite not being as fast or economical as its rivals, snagged third place on account of its excellent drivability and comfort; on the other hand, the AM260, despite not having as much standard equipment, finished in second place, thanks to its combination of power and grip that its AWD system and turbocharged straight-six conferred.





The top three cars of CSR33, from top to bottom: Iurlaro Caterina, AM260 and Seishido Eccelsa

And so to the winner, the Seishido Eccelsa. The host most definitely wasn't fooled by its mediocre performance and simple front-drive chassis (strut front, semi-trailing arm rear - in fact none of the top 5 cars used a multilink rear for practicality and cost reasons), and applauded its excellent comfort and drivability, which were just what the hypothetical customer needed. Understated, elegant styling (especially in the metallic purple of the test example submitted) only sweetened the deal, especially when the chassis was tuned for all-around capability with a decent mix of sportiness and comfort. So, after one full week each for entrants to submit their vehicles and the host to review them, the biggest round in CSR history finally comes to an end.

Tuesday, February 7, 2017

Confessions of an Automationeer, Part 6: Defending My CSR33 Entry

Confessions of an Automationeer, Part 6: Defending My CSR33 Entry

Having sat out the previous round to allow my mind to relax after 17 consecutive rounds of participation (either as an entrant or host), I decided to regroup and prepare myself for CSR33, in which competitors were tasked with building a junior executive car for the 1998 model year. Straight away I reverted to an engineers-first mindset, but after realizing that the car would have to be engineered in 60 months and require no more than 100 production units, I was forced to make a few compromises. The question now was: what should I leave out in order to squeeze the fancier bits in?

When I found out that the design brief called for an entry-level premium car, I thought about making a premium interior, sound system, and safety suite all standard equipment, but ultimately realized that the tight engineering budget would make it impossible. So I settled on a more reliable standard interior instead. I also omitted stability control (but retained traction control) for the same reason - although back in 1998, it most certainly wasn't the universal driving aid it is now. And to compensate for the omission of premium equipment, I explicitly stated in the car's description that it was optional on the trim I would eventually submit.


The standard equipment list on the Kramer K3 2.5. Note that a premium interior and safety suite (incorporating stability control), though not selected here, are stated to be optional.

The chassis and drivetrain configuration also gave me a few headaches. Originally, I wanted my CSR33 entry to be front-wheel-drive (and in fact, many of the submitted entries were), but quickly changed my mind after deciding that I would rather emphasize sportiness, and switched to rear-wheel-drive. Also, the suspension started out as struts up front with a torsion-beam rear, but the latter was replaced with semi-trailing arms, and eventually I opted for control arms at both the front and rear. However, I discovered that I still had some engineering time to spare, and used some of it to install a multilink rear instead, thus improving drivability, sportiness and comfort even further with minimal loss of reliability.


Originally intended to be a front-driver with a transversely mounted engine, a strut-sprung front and torsion-beam rear, the Kramer K3 2.5 emerged as a rear-driver with a longitudinally mounted engine, double wishbones up front and a multi-link rear - and all the better for it.

Designing an engine for the car was no cakewalk either. With the maximum engineering time and production units for an eligible engine capped at 80 each, I was forced to rule out any configuration with more than six cylinders in it, and settled on a straight-six with dual overhead cams, variable valve timing and lift, low-friction pistons, and 2550 cc of displacement. I did, however, ask myself one question: Would a straight-four have been as effective? The answer turned out to be a definite no: the loss of sportiness and prestige clearly outweighed the increase in economy it would have provided. Moreover, I used a normally-aspirated engine, since a turbocharged one would have put me well over budget in terms of engineering time, and even if it didn't, I would sacrifice too much drivability in the process. I was quite happy with how it turned out, though.






An overview of the 2.5-liter straight-six used in my CSR33 entry. This engine is optimized for economy but still develops a decent amount of power at a low price.

As for the remaining trim components, I made choices that would prioritize sportiness over comfort, but kept the use of quality points to a minimum, although negative quality was out of the question. Specifically, the manual transmission made the car harder to drive and reduced the comfort rating, but provided a significant boost to sportiness, while the fitment of all-season tires were ideal for this car's role as a daily driver - high-performance tires would have been at odds with the design ethos if I had offered them as standard, even though it would have increased the sportiness rating even more. In addition, I opted for a combination of a viscous limited-slip differential and vented disc brakes (two-piston calipers up front and single-piston calipers at the rear, plus an anti-lock braking system), providing a well-rounded balance between drivability, sportiness, affordability (both in terms of engineering time and estimated price) and comfort. Finally, I tuned the suspension (which incorporated progressive springs, passive anti-roll bars and monotube dampers) to provide a sporty feel while retaining the drivability and comfort levels expected of a daily driver.






In setting up the K3's mechanicals, I optimized its sportiness while also retaining a decent amount of comfort and drivability.

With the mechanicals and trim now definitively sorted, I was left to finalize the exterior design. However, considering that the car's looks had to convey the right image, the shape, quantity and placement of the fixtures was crucial. After all, entry-level executive cars ought to exude a form of restrained elegance without being too bland or, on the other hand, excessively ostentatious. As such, I decided to keep it simple on the outside, and jazz up some of the fixtures with some chrome trim.

Moreover, the car's exterior color also had to befit its image, and I went with a dark, lustrous red which I called Deep Claret Metallic - I could have chosen a deep blue or green instead for a similar effect, but I stuck with red anyway because I  believed it felt more upscale than the other two. I also found black to be too intimidating, silver or gray to be too dull, and white to be too flashy. And I deliberately extended the rear end as much as the body will allow me to in order to increase the amount of cargo space available, and raked back the A- and C-pillars quite a fair bit to give a sportier side profile.



The Kramer K3 2.5 is known for its stylish exterior... and a huge trunk.

Only time will tell if my enthusiast-focused approach delivers a satisfactory result, but I am certainly going to take pride in what I have built and submitted for this round. For one, making compromises when there is a maximum limit on production units and/or engineering time for the car and/or its engine is not easy, and success here often boils down to using the right equipment. In the lite campaign, where profitability hinges on releasing your cars soon enough to boost sales, this is even more important. As for the results of the current round... well, that will have to wait until the next post.

Friday, February 3, 2017

Confessions of an Automationeer, Part 5: A Retrospective on CSR32

Confessions of an Automationeer, Part 5: A Retrospective on CSR32

As the latest installment of the longest-running Automation community challenge comes to an end, I will share my thoughts and opinions on the requirements, entrants and results on this post, especially since I started writing it on February 1st, which is the deadline for submissions for CSR32. Some of you may be wondering why I am discussing a round which I did not host but did not enter. Well, as it turns out, it perfectly summarizes the problems faced by customers in my home country when they want to buy an entry-level car. The fact that regulations here are particularly lax when compared to those found in developed markets (such as Australia, Europe and America) does not help matters either. Unsurprisingly, after the farcical conclusion to the previous round, I was hoping for the host to implement a totally different rule set from what he eventually came up with - but I could not have been more wrong.

When I first saw the rule set for CSR32, it hit me closer to home than ever before. Although the 28th round also required entrants to build cars suitable for the Indonesian market, that round's rule set classified entrants into sporty station wagons, dedicated sports cars and crossover SUVs. Without going into too much detail, the requirements for each type of car were challenging, but not too strict. The current round, on the other hand, turned out to be much tougher.

Even though I didn't feel like entering the current round, I decided to take a look at the rules anyway. Almost immediately, I was taken aback by how strict and demanding they were: not only were the cars required to be 5-door hatchbacks with at least 4 seats and cost no more than $11,000 with a 20% markup, but they had to be extremely economical (47 US mpg/56 UK mpg, or 5 L/100km) and have an engine of no more than 1200cc (1.2 liters). On top of that, minimal running costs, a modicum of safety, and the ability to use regular unleaded fuel were all mandatory, but the worst part was the $500 penalty for each driving aid included as standard! Understandably, I threw up my hands at this convoluted rule set the moment I saw it, and left the task of building and submitting eligible entries to other users.

However, within just one week, most of the reviews had been posted, and I soon developed mixed feelings about taking a break from CSR. While I now considered it one of the toughest rounds in the history of this challenge, I somehow regretted not taking the opportunity to step out of my comfort zone with a competitive ultra-low budget build, especially since there were plenty of strong contenders for outright honors in this round. On the other hand, there were also quite a few cars that clearly would not have made the first cut due to one or more poor design and/or engineering choices. And after some deliberation, the host awarded the overall win to... an SUV. Specifically, it was a crossover, but although it wasn't a compact passenger car per se, it was still cheap, economical and practical (it had seven seats, after all) - just as the design brief stated. That said, the second-placed car would have been a good choice for those who would rather prefer to focus on economy and running costs - a philosophy that the third-placed car took to greater extremes at the expense of even less practicality.

Thus ends one of the most challenging, yet rewarding rounds in CSR history. And as I now settle down to prepare for the next round, I will prepare for the upcoming CSR33 - assuming it is worth the effort. At the same time, though, I can't help wondering how different a cash-strapped Indonesian car buyer's situation would be if both of the top two cars in CSR32 existed in real life. In that case, he or she would enjoy a stunning blend of practicality and economy, without having to make too many compromises in the name of affordability. And isn't that exactly what the market really needs? I sincerely hope it is.